u-boot.git/board/kmc, branch v2014.07

i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework

2013-11-13T05:08:26Z

This updates to new I2C framwwork on sh_i2c. And this also updates boards(kzm9g and ecovec) that using sh_i2c. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu

board: arm: convert makefiles to Kbuild style

2013-11-01T15:42:12Z

Signed-off-by: Masahiro Yamada Cc: Albert ARIBAUD Cc: Andreas Bießmann Cc: Stefano Babic Cc: Prafulla Wadaskar Cc: Minkyu Kang Cc: Vipin Kumar Cc: Tom Warren Cc: Tom Rini

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

arm: rmobile: kzm9g: Adjust ETM trace clock

2013-02-02T22:45:32Z

Set ETM TRCLK down to 78MHz to get clear wave form. This patch makes difference only when you use ETM trace connecting JTAG debugger. Signed-off-by: Tetsuyuki Kobayashi Acked-by: Nobuhiro Iwamatsu

arm: rmobile: kzm9g: Adjust SDRAM setting

2013-02-02T22:45:28Z

After stress test, I found some of kzm9g board occures memory failure. This patch adust SDRAM setting. - Enlarge drivability on both SDRAM controller and SDRAM itself - Raise core voltage Signed-off-by: Tetsuyuki Kobayashi Acked-by: Nobuhiro Iwamatsu

arm: rmobile: kzm9g: enable I2C2

2012-10-16T03:47:21Z

Acked-by: Nobuhiro Iwamatsu Signed-off-by: Tetsuyuki Kobayashi

arm: rmobile: kzm9g: enable I2C1

2012-10-16T03:47:20Z

Supply clock to I2C1 and release resetting. Acked-by: Nobuhiro Iwamatsu Signed-off-by: Tetsuyuki Kobayashi

arm: rmobile: kzm9g: enable reset command

2012-10-03T00:04:23Z

Do soft power on reset in U-Boot reset command. Signed-off-by: Tetsuyuki Kobayashi Signed-off-by: Nobuhiro Iwamatsu

arm: rmobile: kzm9g: Modify bus controller setting for CS4

2012-10-03T00:04:23Z

Problem: Linux kernel hangs up when it write a file to NFS mounted directory. Solution: Modify bus controller setting for CS4, which connected smsc9221 ethernet controller. Detail: Modify CS4BCR bit[29:28] (IWW[1:0]) from 00 to 01. Modify CS4BCR bit[20:19] (IWRRD[1:0]) from 00 to 01. Modify CS4BCR bit[17:16] (IWRRS[1:0]) from 00 to 01. Modify CS4WCR bit[27:26] (WSW[1:0]) from 10 to 11 Modify CS4WCR bit[25:24] (WHW[1:0]) from 01 to 10 Modify CS4WCR bit[18:16] (WW[2:0]) from 101 to 111 Modify CS4WCR bit[13:11] (SW[2:0]) from 010 to 011 Modify CS4WCR bit[10:7] (WR[3:0]) from 1000 to 1011 Signed-off-by: Tetsuyuki Kobayashi Signed-off-by: Nobuhiro Iwamatsu

arm: rmobile: kzm9g: Adjust low level hardware setting

2012-10-03T00:04:22Z

Adjust low level hardware setting in s_init. Signed-off-by: Tetsuyuki Kobayashi Signed-off-by: Nobuhiro Iwamatsu