u-boot.git/board/lge, branch master

sniper: Change vendor name from lge to lg, matching devicetree vendor prefix

2016-04-01T21:18:06+00:00

This moves the sniper board from the lge to lg, in order to match the devicetree
vendor prefix already defined in the kernel.

Signed-off-by: Paul Kocialkowski

sniper: Proper reboot mode and boot reason validation

2016-04-01T21:18:06+00:00

With the previous implementation, rebooting without registering a recognized
reboot mode (despite registering the magic) would end up with U-Boot checking
for a valid power-on reason, which might result in the device turning off (e.g.
with no USB cable attached and no buttons pressed).

This was designed to catch reboots that are actually intended to be power-off,
something that old Android kernels do, instead of properly turning the device
off using the TWL4030.

However, since this approach is not viable (breaks reboot in most cases), the
validity of the reboot mode magic is checked to detect a reboot and the 'o' char
is recognized to indicate that power-off is required. Still, that might be
overridden by the detection of usual power-on reasons, on purpose.

Signed-off-by: Paul Kocialkowski

sniper: Clear reboot mode garbage on cold reset

2016-03-15T19:10:50+00:00

Reboot mode garbage is found on cold reset and might be seen as valid on the
next warm reset, thus it has to be cleared on cold reset.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini

sniper: Get rid of reset_misc

2016-03-15T19:10:49+00:00

There is no need to set the reboot mode to a particular value prior to reboot,
since valid values will have been caught and cleared earlier.

In addition, this breaks the reboot-bootloader fastboot call, by overriding the
required value for fastboot.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini

omap3: String-based reboot mode handling

2016-03-15T19:10:47+00:00

This switches reboot mode handling to a string-based interface, that allows more
flexibility to set a common interface with the next generations of OMAP devices.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini

sniper: Various minor cleanups, missing Kconfig configs and reorganisation

2016-02-29T19:49:37+00:00

This introduces some minor cleanups, regarding aspects such as board name, code
and headers organization as well as deprecated and missing config options.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini

sniper: Drop references to P970

2016-02-08T15:24:19+00:00

There are various different boards with the same hardware sold as LG Optimus
Black, such as P970, P970g and KU5900. Since this port is functional for all
variants, it doesn't make sense to keep references to P970.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini

sniper: Mux configuration cleanup

2016-01-14T02:05:24+00:00

This cleans up the mux configuration a bit, setting mmc clock signals to input
enabled and specifying pull-down (0) when pull is not used.

Signed-off-by: Paul Kocialkowski

ns16550: unify serial_omap

2015-11-22T02:50:17+00:00

Unify serial_omap, and use the generic binding.

Signed-off-by: Thomas Chou 
Reviewed-by: Tom Rini 
Acked-by: Simon Glass

omap-common: Common get_board_serial function to pass serial through ATAG

2015-10-22T18:18:31+00:00

Since there is a common function to grab the serial number from the die id bits,
it makes sense have one to parse that serial number and feed it to the serial
ATAG.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini