u-boot.git/board/logicpd, branch v2010.09

ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7

2010-07-05T23:59:55Z

The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V Signed-off-by: Steve Sakoman Signed-off-by: Sandeep Paulraj

AM35x: Add support for AM3517EVM

2010-06-08T15:07:18Z

This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath Signed-off-by: Sanjeev Premi Signed-off-by: Sandeep Paulraj

arm, i.mx27: add support for magnesium board from projectiondesign

2010-04-30T10:23:23Z

This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher

serial: struct serial_device: add uninit() entry for drivers

2010-04-24T19:34:07Z

Subsequent patch extends mpc512x serial driver to support multiple PSC ports. The driver will provide an uninit() function to stop the serial controller and to disable the controller's clock. Adding uninit() entry to struct serial_device allows disabling the serial controller after usage of a stdio serial device. This patch adds uninit() entry to the struct serial_device and fixes initialization of this structure in the code accordingly. Signed-off-by: Anatolij Gustschin

Move arch/ppc to arch/powerpc

2010-04-21T21:42:38Z

As discussed on the list, move "arch/ppc" to "arch/powerpc" to better match the Linux directory structure. Please note that this patch also changes the "ppc" target in MAKEALL to "powerpc" to match this new infrastructure. But "ppc" is kept as an alias for now, to not break compatibility with scripts using this name. Signed-off-by: Stefan Roese Acked-by: Wolfgang Denk Acked-by: Detlev Zundel Acked-by: Kim Phillips Cc: Peter Tyser Cc: Anatolij Gustschin

arm: Move cpu/$CPU to arch/arm/cpu/$CPU

2010-04-13T07:13:24Z

Signed-off-by: Peter Tyser

ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

2010-04-13T07:13:16Z

Signed-off-by: Peter Tyser

TWL4030: make LEDs selectable for twl4030_led_init()

2010-01-04T14:48:15Z

Not all boards have both LEDs hooked, so enabling both on boards with single LED will just waste power. Make it possible to choose LEDs by adding argument to twl4030_led_init(). Using this turn on only LEDB for pandora, leave both LEDs on for all other boards, as it was before this patch. Signed-off-by: Grazvydas Ignotas

Merge branch 'master' of git://git.denx.de/u-boot-usb

2009-12-21T20:01:56Z

OMAP3 zoom2 Use usbtty if the debug board is not connected.

2009-12-20T11:51:51Z

The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix