u-boot.git/board/logicpd, branch v2012.04

omap3logic: Add missing GPMC pinmux for LAN92xx access

2012-02-12T09:11:32+00:00

The initial checkin dropped pinmux setup for GPMC pins A6-A10, D0-D7 and
NCS1/2 necessary to access LAN92xx on Logic OMAP35x/DM37x modules.

Signed-off-by: Peter Barada

ARMV7: Add support For Logic OMAP35x/DM37x modules

2012-01-16T07:40:10+00:00

This patch adds basic support for OMAP35x/DM37x SOM LV/Torpedo
reference boards. It assumes U-boot is loaded to SDRAM with the
help of another small bootloader (x-load) running from SRAM.

Signed-off-by: Peter Barada 
Cc: Tom Rini 
Cc: Igor Grinberg 
Cc: Wolfgang Denk 
Acked-by: Igor Grinberg

AM3517: Add SPL support

2011-12-06T22:59:39+00:00

The only change of note is that we move from 0x80008000 to 0x80100000
for CONFIG_SYS_TEXT_BASE

Cc: Vaibhav Hiremath 
Signed-off-by: Tom Rini

AM3517: move AM3517 specific mux defines to generic header

2011-12-06T22:59:36+00:00

AM3517 specific CONTROL_PADCONF_* defines moved from board-specific
files to 

Signed-off-by: Ilya Yanok

omap: Don't use gpio_free to change direction to input

2011-10-27T19:56:35+00:00

gpio_free() should not have the side effect of setting the line to input since this prevents the gpio command from being able to set a line as output.

Signed-off-by: Joe Hershberger 
Cc: Joe Hershberger 
Cc: Sandeep Paulraj 
Signed-off-by: Sandeep Paulraj

imx: fix coding style

2011-10-27T19:56:32+00:00

Fix checkpatch warning and errors in several i.MX related files.

While at it also address a checkpatch warning at arch/arm/cpu/armv7/mx5/soc.c
regarding the usage of extern in a C file.

Signed-off-by: Fabio Estevam

mx31: provide readable WEIM CS accessor

2011-10-27T19:56:30+00:00

setup_weimcs() and some macros are added to support the setup
for i.MX31 WEIM chip selects. As a compromise between verbosity
and readability an ASCII-art'ish bit comment is used instead of
bitfields.
All i.MX31 boards have been patched to use this approach using a
helper program to verify the changes.

Signed-off-by: Helmut Raiger 
Acked-by: Stefano Babic

punt unused clean/distclean targets

2011-10-15T20:20:36+00:00

The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger

imx31_litekit: Place machine ID into board config

2011-09-30T20:01:04+00:00

Let common code set the machine ID.

Signed-off-by: Fabio Estevam

imx31_litekit: Remove dram_init_banksize()

2011-09-30T20:01:03+00:00

As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c

Signed-off-by: Fabio Estevam