u-boot.git/board/logicpd, branch v2016.09

omap3logic: Fix PBIAS Bug

2016-09-06T17:41:42+00:00

The PBIAS fixing is done in the MMC driver, and doing it in the
the board file conflicts with the driver causing intermittent
hangs on reboot.  Remove this from the board file and let
the driver do it.

Signed-off-by: Adam Ford 
Reviewed-by: Tom Rini

armv7: make gpmc_cfg const

2016-07-22T18:46:00+00:00

Signed-off-by: Ladislav Michl 
[trini: Adapt am33xx, duovero, omap_zoom1]
Signed-off-by: Tom Rini 

Signed-off-by: Tom Rini

ARM: Various: Future-proof serial platdata

2016-03-14T23:18:48+00:00

A few boards still use ns16550_platdata structures, but assume the structure
is going to be in a specific order. By explicitly naming each entry,
this should also help 'future-proof' in the event the structure changes.

Tested on the Logic PD Torpedo + Wireless.

I only changed a handful of devices that used the same syntax as the Logic
board.  Appologies if I missed one or stepped on toes.  Thanks to Derald Woods
and Alexander Graf.

Signed-off-by: Adam Ford 

V6: Add fix to arch/arm/cpu/armv7/am33xx/board.c

V5: Add fix to arch/arm/cpu/arm926ejs/lpc32xx/devices.c

V4: Fix subject heading

V3: Remove  reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.

V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
Reviewed-by: Mugunthan V N 
Reviewed-by: Simon Glass

OMAP3SOM BOARD: Auto detect Logic PD Models

2016-02-24T23:44:00+00:00

Logic PD makes four different system on modules.  This patch will auto
detect the board type and identify the corresponding device tree image.

V2:
Added 'default:' case to switch statement
Since board_late_init() is defined as int, we now return 0

Signed-off-by: Derald Woods 
Signed-off-by: Adam Ford

OMAP3LOGIC: Update maintainer

2016-02-15T17:04:45+00:00

I will take this over from Peter Barada, since I work with it daily
at Logic PD.

Signed-off-by: Adam Ford 
Acked-by: Peter Barada

OMAP3: omap3_logic: Enable Android Fastboot

2016-02-08T15:10:43+00:00

Android Fastboot requires USB.  The TWL4030 PMIC on omap3_logic handles USB traffic.
This patch sets up the USB gadget and Android Fastboot to match what is done in the
omap3_beagle project.

Signed-off-by: Adam Ford 
Reviewed-by: Tom Rini

OMAP3: Enable SPL on omap3_logic

2016-02-08T15:10:39+00:00

Previously, Omap3_logic assumed X-loader was present.  With this
patch, we can finally replace X-loader with an MLO generated by
U-Boot.  This requires ECC to be setup to match the Linux Kernel
and the PBIAS confgured for the SD card.

Signed-off-by: Derald D. Woods 
Signed-off-by: Adam Ford 
Reviewed-by: Tom Rini

ARM: omap3_logic: Fix pin muxing

2016-02-08T15:10:33+00:00

Enhance pin muxing to enable more board features and reduce power
based on Tony's device tree work.

Signed-off-by: Adam Ford

ns16550: unify serial_omap

2015-11-22T02:50:17+00:00

Unify serial_omap, and use the generic binding.

Signed-off-by: Thomas Chou 
Reviewed-by: Tom Rini 
Acked-by: Simon Glass

omap-common: Common function to display die id, replacing omap3-specific version

2015-10-22T18:18:30+00:00

This introduces omap_die_id_display to display the full die id.
There is no need to store it in an environment variable, that no boot script
is using anyway.

Signed-off-by: Paul Kocialkowski 
Reviewed-by: Tom Rini