u-boot.git/board/logicpd, branch v2017.07

Merge branch 'master' of git://git.denx.de/u-boot-mmc

2017-05-16T12:10:50Z

- Add #undef CONFIG_DM_MMC_OPS to omap3_logic in the SPL build case, to match other TI platforms in the same situation. Signed-off-by: Tom Rini

omap3: omap3_logic: switch to using TI_COMMON_CMD_OPTION

2017-05-15T17:00:27Z

Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig CMD_USB isn't enabled yet. I have some testing to do with musb. Signed-off-by: Adam Ford Reviewed-by: Tom Rini

mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC

2017-05-15T09:28:23Z

Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig. We do not need two options for the same feature. Deprecate the former. This commit was generated with the sed script 's/GENERIC_MMC/MMC/' and manual fixup of drivers/mmc/Kconfig. Signed-off-by: Masahiro Yamada

omap3_logic: Add Device Tree Support and more DM drivers

2017-05-10T00:35:38Z

This patch also removes all the excessive code for NS16550 intiailization as the device tree can do that now. This also adds DM_I2C and DM_MMC since the overlying drivers have the built-in support already. The corresponding include/config/omap3_logic.h also reduced in size due to the new device tree support. Signed-off-by: Adam Ford Changes in V2: Retain Auto-detect ability between SOM-LV and Torpedo Split this off from the device sub submissions

imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM

2017-04-12T16:59:12Z

Logic PD has an i.MX6Q system on module (SOM) with a development kit. The SOM has a built-in microSD socket, DDR and NAND flash. The development kit has an SMSC Ethernet PHY, serial debug port and a variety of peripherals. This have been verified to boot the i.MX6Q version over either SD on the development kit or NAND built into the SOM. Items in the dtsi file are specific to the SOM itself. Items in the dts file are in the baseboard. Future versions of the SOM will come out supporting the same basebord and potentially future base boards will come out supporting the same SOM. Signed-off-by: Adam Ford

ti: boot: Register the MMC controllers in SPL in the same way as in u-boot

2017-03-20T02:17:14Z

To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: Jean-Jacques Hiblot

serial, ns16550: bugfix: ns16550 fifo not enabled

2017-01-20T14:15:19Z

commit: 65f83802b7a5b "serial: 16550: Add getfcr accessor" breaks u-boot commandline working with long commands sending to the board. Since the above patch, you have to setup the fcr register. For board/archs which enable OF_PLATDATA, the new field fcr in struct ns16550_platdata is not filled with a default value ... This leads in not setting up the uarts fifo, which ends in problems, when you send long commands to u-boots commandline. Detected this issue with automated tbot tests on am335x based shc board. The error does not popup, if you type commands. You need to copy&paste a long command to u-boots commandshell (or send a long command with tbot) Possible boards/plattforms with problems: ./arch/arm/cpu/arm926ejs/lpc32xx/devices.c ./arch/arm/mach-tegra/board.c ./board/overo/overo.c ./board/quipos/cairo/cairo.c ./board/logicpd/omap3som/omap3logic.c ./board/logicpd/zoom1/zoom1.c ./board/timll/devkit8000/devkit8000.c ./board/lg/sniper/sniper.c ./board/ti/beagle/beagle.c ./drivers/serial/serial_rockchip.c Signed-off-by: Heiko Schocher Signed-off-by: Ladislav Michl Tested-by: Adam Ford Reviewed-by: Tom Rini

omap3_logic: Rework MACH_TYPE and fdtfile logic

2017-01-14T17:18:07Z

The MACH_TYPE values for the omap37xx based platforms are no longer officially valid, so we must not set and pass them. In order to not reference them but still be able to set the default fdtfile based on the board detection logic we need to combine the two steps into one. Cc: Adam Ford Signed-off-by: Tom Rini Acked-by: Adam Ford

omap3logic: Fix Auto detect Logic PD Models

2016-10-31T14:13:16Z

The autodetect feature doesn't allow users to specify the device tree. This fix will make it only autodetect if 'fdtimage' is not defined. Signed-off-by: Adam Ford Reviewed-by: Tom Rini

treewide: replace #include with

2016-09-23T21:55:42Z

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap ) Replace all include directives for with . Signed-off-by: Masahiro Yamada [trini: Fixup include/clk.] Signed-off-by: Tom Rini