u-boot.git/board/logicpd, branch v2018.07

ARM: am3517_evm: Enable SPL_OF_CONTROL and SPL_OF_PLATDATA

2018-06-13T11:49:14Z

The SPL doesn't have much room, so in order to support OF_CONTROL in SPL, we need the extra functionality of SPL_OF_PLATDATA. Adding these features allows us to remove a small part of code without losing the serial port during SPL. Signed-off-by: Adam Ford

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

net: Move enetaddr env access code to env config instead of net config

2018-04-09T03:00:58Z

In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: Alex Kiernan

omap3_logic: Clean up I2C pin muxing.

2018-01-28T17:27:37Z

The SOM has external pull-up resistors, so let's turn these off. It was helping reduce some errors when running I2C1 @ 2.6MHz. Signed-off-by: Adam Ford

ARM: omap3_logic: Enable SPL_OF_CONTROL and SPL_OF_PLATDATA

2018-01-22T15:27:13Z

ARM: omap3_logic: Enable NAND unlocking during Falcon mode

2017-12-13T02:33:38Z

Falcon mode was already working with SD card. This enables the unlocking of NAND to allow the NAND read & write. This also expands the README file based on the am335x describing how to setup Falcon mode. Signed-off-by: Adam Ford

ARM: omap3_logic: Unlock NAND automatically in U-Boot

2017-12-13T02:33:38Z

The Micron Flash is locked by default. This will automaticlly unlock so manually unlocking is unnecessary in U-Boot. Signed-off-by: Adam Ford

mtd: nand: Rename nand.h into rawnand.h

2017-12-04T13:00:00Z

This header was renamed to rawnand.h in Linux. The following is the corresponding commit in Linux. commit d4092d76a4a4e57b65910899948a83cc8646c5a5 Author: Boris Brezillon Date: Fri Aug 4 17:29:10 2017 +0200 mtd: nand: Rename nand.h into rawnand.h We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Masahiro Yamada

omap3: omap3_logic: Move pinmuxing to header file

2017-11-17T12:44:13Z

To keep the board file smaller and clean, let's move the pinmux to the header file. Signed-off-by: Adam Ford

imx: Include header file

2017-10-12T15:31:16Z

When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including . Signed-off-by: Diego Dorta Reviewed-by: Fabio Estevam