u-boot.git/board/logicpd, branch v2020.07

imx: Remove ARCH= references from documentation

2020-06-02T21:27:04Z

When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Adam Ford Cc: Vanessa Maegima Cc: Otavio Salvador Cc: Igor Opaniuk Cc: Manivannan Sadhasivam Signed-off-by: Tom Rini

Merge tag 'ti-v2020.07-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti

2020-05-25T18:09:42Z

- Enable DM_ETH on omap3_logic board - Enable Caches in SPL for K3 platforms - Enable backup boot mode support for J721E - Update the DDR timings for AM654 EVM - Add automated tests for RX-51

ARM: omap3_logic boards: Convert to DM_ETH

2020-05-19T09:10:42Z

With the converstion of SMC911x to DM, this can facilitate the omap3 boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. There isn't a clean solution to doing this in phases, so the boards are all being done together to avoid breaking functionality. Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs to show the address of the ethernet controller for each board. The board file, which is common betwen the OMAP35 and DM37 SOM LV and Torpedo boards, can remove the manual ethernet initialization, but it still needs to register the address and GPMC configuration for the Ethernet controller which is now being moved around to board_late_init(). Lastly, this patch updates the various config files to add the reference for DM_ETH and remove the SMC address, which is now fetched from the newly created device tree nodes. Signed-off-by: Adam Ford

common: Drop init.h from common header

2020-05-18T21:33:33Z

Move this uncommon header out of the common header. Signed-off-by: Simon Glass

common: Drop net.h from common header

2020-05-18T21:33:31Z

Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass

ARM: imx6q_logic: Cleanup boot sequence check

2019-12-27T13:30:52Z

The board_boot_order() function currenly assumes that the boot source is MMC/eMMC, but this isn't true for the NAND devices. This patch cleans up board_boot_order() to check for NAND, SD, ESD, MMC or EMMC. Anything beyond these are not supported, so it will default back to the serial downloader if any of those devices are not available. Fixes: 9fb50c68daa6 ("ARM: imx6q_logic: Fix MMC2 booting") Signed-off-by: Adam Ford

common: Move some board functions out of common.h

2019-12-02T23:25:21Z

A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move serial functions out of common.h

2019-12-02T23:23:11Z

These functions belong in serial.h so move them over. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

ARM: omap3_logic: Power on MMC when setting up PMIC

2019-11-07T23:39:18Z

The PMIC enables power to the MMC card by default, but depending on the state it was left when restarted, it's possible the MMC may be powered down. This patch patch explicitly tells the twl4030 to power the MMC. Signed-off-by: Adam Ford

ARM: imx6q_logic: Remove legacy pinmuxing code from board file.

2019-10-13T20:49:11Z

With the OCRAM expanded to 256KB and the SPL_PINCTRL enabled with -u-boot.dtsi entries to include the pinmuxing in SPL, the manual code setting up the pinmux can go away. This patch removes the legacy pinmuxing code from the board file. Signed-off-by: Adam Ford Reviewed-by: Fabio Estevam