u-boot.git/board/mediatek, branch v2020.07

common: Drop log.h from common header

2020-05-19T01:19:18Z

Move this header out of the common header. Signed-off-by: Simon Glass

command: Remove the cmd_tbl_t typedef

2020-05-18T22:36:55Z

We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass

common: Drop init.h from common header

2020-05-18T21:33:33Z

Move this uncommon header out of the common header. Signed-off-by: Simon Glass

mips: mtmips: add support for mt7628-rfb

2020-04-27T18:30:13Z

This patch adds support for mt7628 reference board. SPL_DM and DT are not enabled for SPL to save about 17KiB for u-boot-spl.bin. Reviewed-by: Stefan Roese Signed-off-by: Weijie Gao

ARM: Mediatek: Add board_late_init to init usb gadget driver

2020-01-25T17:04:36Z

Add board_late_init function to init usb gadget driver for mt8518 Signed-off-by: mingming lee

Add support for MT7622 reference board

2020-01-16T14:39:45Z

This adds a general board file based on MT7622 SoCs from MediaTek. This commit is adding the basic boot support for the MT7622 rfb. Signed-off-by: Sam Shih Reviewed-by: Ryder Lee Tested-by: Frank Wunderlich

ARM: MediaTek: add basic support for MT8512 boards

2020-01-16T14:39:45Z

This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee

ARM: MediaTek: add basic support for MT8518 boards

2019-12-03T17:00:03Z

This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini

board: mediatek: Add pumpkin board support

2019-07-29T13:32:11Z

The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent

adding saveenv-command for bananapi r2

2019-01-18T14:26:04Z

bananapi r2 can be booted from sd-card and emmc saving the environment have to choose the storage from which the device has booted also the offset is set to 1MB to make sure env is written to block "user data area" between uboot and first partition https://www.fw-web.de/dokuwiki/lib/exe/fetch.php?cache=&media=bpi-r2:boot-structure.png Signed-off-by: Frank Wunderlich