u-boot.git/board/mediatek, branch v2024.01

board: Remove essentially empty board files and Makefiles

2023-10-09T19:24:31Z

As part of reviewing a new platform, Daniel Schwierzeck noted that we can have an empty Makefile in the board directory and don't need an empty board.c file as well. Further with further cleanup in the Makefile we can now omit the Makefile entirely. Remove a number of now unnecessary board.c and Makefiles. Signed-off-by: Tom Rini

common: Drop linux/printk.h from common header

2023-09-24T13:54:57Z

This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass

board: mediatek: add MT7988 reference boards

2023-08-03T13:40:50Z

This patch adds general board files based on MT7988 SoCs. MT7988 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller booting from SD are also shared with one of spi controllers. So two configs are need for these boot types: 1. mt7988_rfb_defconfig - SPI-NOR, SPI-NAND and eMMC 2. mt7988_sd_rfb_defconfig - SPI-NAND and SD Signed-off-by: Weijie Gao

arm: mediatek: retrieve ram_base from dts node for armv8 platform

2023-08-03T13:40:48Z

Now we use fdtdec_setup_mem_size_base() to get DRAM base from fdt ram node and update gd->ram_base. CFG_SYS_SDRAM_BASE is unused and will be removed. Also, since mt7622 always passes fdt to linux kernel, there's no need to assign value to gd->bd->bi_boot_params. Signed-off-by: Weijie Gao

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

2022-12-05T21:06:07Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

board: mediatek: add MT7981 reference boards

2022-09-23T19:09:15Z

This patch adds general board files based on MT7981 SoCs. MT7981 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller are also shared with spi controller. So three configs are need for these boot types: 1. mt7981_rfb_defconfig - SPI-NOR and SPI-NAND 2. mt7981_emmc_rfb_defconfig - eMMC only 3. mt7981_sd_rfb_defconfig - SD only Reviewed-by: Simon Glass Signed-off-by: Weijie Gao

board: mediatek: add MT7986 reference boards

2022-09-23T19:09:15Z

Add general board files based on MT7986 SoCs. MT7986 uses one mmc controller for booting from both SD and eMMC. Both MT7986A and MT7986B use the same pins for spi controller. Configs for various boot types: 1. mt7986_rfb_defconfig - SPI-NOR and SPI-NAND for MT7986A/B 2. mt7986a_bpir3_emmc_defconfig - eMMC for MT7986A only 3. mt7986a_bpir3_sd_defconfig - SD for MT7986A only Reviewed-by: Simon Glass Signed-off-by: Weijie Gao

mips: mtmips: add two reference boards for mt7621

2022-07-13T21:03:37Z

The mt7621_rfb board supports integrated giga PHYs plus one external giga PHYs. It also has up to 512MiB DDR3, 16MB SPI-NOR, 3 mini PCI-e x1 slots, SDXC and USB. The mt7621_nand_rfb board is almost the same as mt7621_rfb board, but it uses NAND flash and SDXC is not available. Reviewed-by: Stefan Roese Reviewed-by: Daniel Schwierzeck Signed-off-by: Weijie Gao

WS cleanup: remove trailing empty lines

2021-09-30T12:08:56Z

Signed-off-by: Wolfgang Denk

arm: mediatek: merge board Kconfigs into mach-mediatek

2021-09-23T18:15:32Z

On MediaTek boards we cannot override the SYS_BOARD / SYS_CONFIG_NAME variables from defconfig. This is because in board/mediatek/mtXXXX/Kconfig this value was override by default due to the if CONFIG_TARGET_MTXXXX condition. Merge all the Kconfigs to the mach-medatek/Kconfig. This way: - we only define SYS_{SOC,VENDOR} once - all board definitions are in a single place, simplifying the build logic. Signed-off-by: Guillaume La Roque