Make all Icicle Kit files generic. This supports the addition of
upcoming support for other MPFS boards.

Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

A new system controller driver has been created to make code modular and
improve and clean code. Update and remove functions to account for these
additional drivers.

Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Enable the MPFS mailbox and system controller drivers for use with the
Icicle kit. These functions are crucial for the board setup functions
that run in the Icicle board file - mpfs_icicle.c.

Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Move ethernet mac address setting to ft_board_setup() to remove the need
for fdt set in custom boot script.

Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>

The loop in the icicle implementation of board_fit_config_name_match()
runs strtok() to split off the vendor portion of the compatible string
using , as the delimiter. strtok() modifies a string in place, so where
the first config and compatible do not match, the compatible has been
modified by the time the loop hits the second iteration.
Since stringlists in dt land are null separated strings, the nulls
strtok() inserts to replace the delimiter increase the number of strings
in the compatible list. When the second iteration of the loop calls
fdt_stringlist_get(), it gets the vendorless portion of the first
compatible string, rather than the second compatible string. Copy each
compatible before calling strtok() to avoid this problem.

The temporary string the compatible is copied to is statically
allocated, as attempts to dynamically allocate it at this stage of boot
were met with "alloc space exhausted" errors.

Fixes: 7c16ebba1ed ("board: mpfs_icicle: implement board_fdt_blob_setup()/board_fit_config_name_match()")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

The firmware on the Icicle is capable of providing a devicetree in a1 to
U-Boot, but until now the devicetree has been packaged in a "payload" [1]
alongside U-Boot (or other bootloaders/RTOSes) and appended to the image.
The address of this appended devicetree is placed in a1 by the firmware.
This meant that the mechanism used by OF_SEPARATE to locate the
devicetree at the end of the image would pick up the one provided by the
firmware when u-boot-nodtb.bin was in the payload and U-Boot's devicetree
when u-boot.bin was.

The firmware is now going to be capable of providing a minimal devicetree
(quite cut down due to severe space constraints), but this devicetree is
linked into the firmware that runs out of the L2 rather than at the end
of the U-Boot image.

Implement board_fdt_blob_setup() so that this devicetree can be
optionally used, and the devicetree provided in the "payload" can be
used without relying on "happening" to implement the same strategy as
OF_SEPARATE expects in combination with u-boot-nodtb.bin.
Unlike other RISC-V boards, the firmware provided devicetree is only
used when OF_BOARD is set, so that the almost certainly more complete
devicetree in U-Boot will be used unless explicitly requested otherwise.

Implement board_fit_config_name_match(), so that, using the firmware
provided cut-down/minimal dtb, U-Boot can select one of several
devicetrees when MULTI_DTB_FIT is enabled.

Enabling both MULTI_DTB_FIT and OF_BOARD will lead to a conflict
between the two options, with the latter taking priority due to
board_fdt_blob_setup() being executed before board_fit_config_name_match(),
which causes gd->fdt_blob to be overwritten with a pointer to the
minimal devicetree rather than the location of the fit image containing
the multiple dtbs. Let MULTI_DTB_FIT take priority in this case, by
explicitly blocking the override when MULTI_DTB_FIT is enabled.

Link: https://github.com/polarfire-soc/hart-software-services/blob/master/tools/hss-payload-generator/README.md [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>

The clock driver for PolarFire SoC now requires syscon and regmap
features, so imply them to preserve implication of the clock driver.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Padmarao is leaving Microchip soon, and suggested that I should take
over maintaining the Icicle in U-Boot in his stead.

Suggested-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

Prepare v2024.070-rc4