u-boot.git/board/mini-box, branch v2016.07

board: atmel: clean up peripheral clock code

2016-02-18T20:34:40+00:00

Due to introducing the new peripheral clock handle functions,
use these functions to reduce duplicated code.

Signed-off-by: Wenyou Yang 
Tested-by: Heiko Schocher 
[Rebased on current master, fixup for at91rm9200ek]
Signed-off-by: Andreas Bießmann

arm: at91/spl: mpddrc: add struct atmel_mpddrc_config

2016-02-02T10:49:11+00:00

Add struct atmel_mpddrc_config to accommodate the mpddrc register
configurations, not using the mpddrc register map structure,
struct atmel_mpddrc, in order to increase readability and reduce
run-time memory use.

Signed-off-by: Wenyou Yang 
Reviewed-by: Andreas Bießmann

arm: at91: add support for mini-box picosam9g45 board

2015-08-21T13:47:04+00:00

Bootlog:
U-Boot SPL 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21)
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 33024000 Hz, block size 512
reading u-boot.img
reading u-boot.img

U-Boot 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21 +0000)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
       Watchdog enabled
DRAM:  256 MiB
WARNING: Caches not enabled
MMC:   mci: 0
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 33333333 Hz, block size 512
reading uboot.env
In:    serial
Out:   serial
Err:   serial
Net:   macb0
Error: macb0 address not set.

Hit any key to stop autoboot:  0
U-Boot>

Signed-off-by: Erik van Luijk 
[add 'picosam9g45_defconfig' to MAINTAINERS]
Signed-off-by: Andreas Bießmann