u-boot.git/board/nvidia/dalmore, branch v2015.01

dm: i2c: tegra: Convert to driver model

2014-12-11T20:18:44Z

This converts all Tegra boards over to use driver model for I2C. The driver is adjusted to use driver model and the following obsolete CONFIGs are removed: - CONFIG_SYS_I2C_INIT_BOARD - CONFIG_I2C_MULTI_BUS - CONFIG_SYS_MAX_I2C_BUS - CONFIG_SYS_I2C_SPEED - CONFIG_SYS_I2C This has been tested on: - trimslice (no I2C) - beaver - Jetson-TK1 It has not been tested on Tegra 114 as I don't have that board. Acked-by: Heiko Schocher Signed-off-by: Simon Glass

kconfig: remove redundant "string" type in arch and board Kconfigs

2014-09-13T20:43:55Z

Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_$ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME$/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada

tegra: kconfig: move board select menu and common settings

2014-08-31T01:19:32Z

Becuase the board select menu in arch/arm/Kconfig is too big, move the Tegra board select menu to tegra/Kconfig. Insert the Tegra SoC select menu between the arch select and the board select. Architecture select |-- Tegra Platform (Tegra) |- Tegra SoC select (Tegra20 / 30 / 114 / 124) |- Board select Consolidate also common settings (CONFIG_SYS_CPU="armv7" and CONFIG_SYS_SOC="tegra*") and always "select" CONFIG_SPL as follows: config TEGRA bool select SPL Signed-off-by: Masahiro Yamada Acked-by: Stephen Warren Cc: Tom Warren

Add board MAINTAINERS files

2014-07-30T12:48:06Z

We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada Suggested-by: Tom Rini Acked-by: Simon Glass

kconfig: add board Kconfig and defconfig files

2014-07-30T12:48:01Z

This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada Acked-by: Simon Glass

ARM: tegra: Tegra114 pinmux cleanup

2014-04-17T15:41:06Z

This renames all the pinmux pins, drive groups, and functions so they have a prefix which matches the type name. These lists are also auto- generated using scripts that were also used to generate the kernel pinctrl drivers. This ensures that the lists are consistent between the two. The entries in tegra114_pingroups[] are all updated to remove the columns which are no longer used. All affected code is updated to match. This introduces a few changes to pin/group/function naming and the set of available functions for each pin. The new values now exactly match the TRM; the chip documentation. I adjusted a few entries in pinmux-config-dalmore.h due to this. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren

ARM: tegra: pinmux naming consistency fixes

2014-04-17T15:41:05Z

Clean up the naming of pinmux-related objects: * Refer to drive groups rather than pad groups to match the Linux kernel. * Ensure all pinmux API types are prefixed with pmux_, values (defines) are prefixed with PMUX_, and functions prefixed with pinmux_. * Modify a few type names to make their content clearer. * Minimal changes to SoC-specific .h/.c files are made so the code still compiles. A separate per-SoC change will be made immediately following, in order to keep individual patch size down. Signed-off-by: Stephen Warren Acked-by: Simon Glass Signed-off-by: Tom Warren

ARM: tegra: make all I2C ports open-drain

2014-03-26T22:20:56Z

I2C protocol requires open-drain IOs. Fix the Dalmore and Venice2 pinmux tables to configure the IOs correctly. Without this, Tegra may actively drive the lines high while an external device is actively driving the lines low, which can only lead to bad things. Signed-off-by: Stephen Warren Acked-by: Simon Glass Signed-off-by: Tom Warren

board: arm: convert makefiles to Kbuild style

2013-11-01T15:42:12Z

Signed-off-by: Masahiro Yamada Cc: Albert ARIBAUD Cc: Andreas Bießmann Cc: Stefano Babic Cc: Prafulla Wadaskar Cc: Minkyu Kang Cc: Vipin Kumar Cc: Tom Warren Cc: Tom Rini

Tegra114: MMC: Add SD bus power-rail init routine

2013-03-25T16:56:07Z

T114 requires SD bus power-rail bringup for the SDIO card on SDMMC3. Signed-off-by: Tom Warren Reviewed-by: Stephen Warren