u-boot.git/board/nvidia/harmony, branch v2012.10

Tegra: Change Tegra20 to Tegra in common code, prep for T30

2012-09-10T20:01:24Z

Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate. Convert tegra20_ source file and function names to tegra_, also. Upcoming Tegra30 port will use common code/defines/names where possible. Signed-off-by: Tom Warren Acked-by: Stephen Warren

ARM: tegra: remove redundant mkdirs from board Makefiles

2012-09-07T20:54:31Z

None of harmony, seaboard, ventana, whistler directly build files from ../common/, so there's no need to mkdir the obj directory for such files. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren

tegra20: rename tegra2 -> tegra20

2012-09-01T12:58:21Z

This is make naming consistent with the kernel and devicetree and in preparation of pulling out the common tegra20 code. Signed-off-by: Allen Martin Acked-by: Stephen Warren Tested-by: Thierry Reding Signed-off-by: Tom Warren

mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*

2012-07-07T12:07:20Z

In anticipation of Tegra3 support, continue removing/renaming Tegra2-specific files. No functional changes (yet). Updated copyrights to 2012. Signed-off-by: Tom Warren

tegra: Use funcmux for MMC on harmony

2012-02-12T09:11:22Z

Use the new funcmux_select() feature to set up the MMC pin mux. Signed-off-by: Simon Glass Signed-off-by: Tom Warren

arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master

2011-12-24T09:23:32Z

Seaboard changes have removed the need for common/board.o in the Makefile. Propagate this change to the other Tegra2 builds. Signed-off-by: Tom Warren

tegra2: Move tegra2_mmc_init() prototype to public header.

2011-12-24T09:23:31Z

tegra2_mmc_init() is implemented by the Tegra2 MMC driver. Since most of the Tegra2-based boards will need to call it, this commit exports it in the new public asm/arch/mmc.h header file to prevent each board from providing its own prototype. Signed-off-by: Thierry Reding Acked-by: Stephen Warren Tested-by: Stephen Warren Acked-by: Simon Glass Signed-off-by: Tom Warren

tegra2: Modify MMC driver to handle power and cd GPIOs

2011-12-09T16:30:08Z

Pass the GPIO numbers for power and card detect to tegra2_mmc_init(), and modify that function to perform all required GPIO initialization. This removes the need for board files to perform these operations. Move board_mmc_getcd() into tegra2_mmc.c now that the driver knows which GPIOs to use. Update affected call-sites in seaboard.c and harmony.c. Note that this change should make all SD ports work on Harmony, since the required GPIO setup is now being performed. v4: Fix prototype of tegra2_mmc_init() in board.h to match driver change. Remove prototype of gpio_config_mmc() from board.h Signed-off-by: Stephen Warren Cc: Andy Fleming Tested-by: Simon Glass Acked-by: Simon Glass Acked-by: Andy Fleming Signed-off-by: Tom Warren

tegra2: Move board_mmc_init into board files

2011-12-09T16:30:08Z

For Seaboard, this is mostly a cut/paste of board_mmc_init() and pin_mux_mmc() into seaboard.c; pin_mux_mmc() was modified to add some missing pinmux_tristate_disable calls for the GPIOs. For Harmony, those functions were modified to configure SDMMC2 (index 2) instead of SDMMC3 (index 1), since that's what is present on the board. However, harmony.c is still missing the required GPIO setup, so neither port is likely to function correctly yet. This will be fixed in the next change. v4: Include board.h to prototype tegra2_mmc_init(). Signed-off-by: Stephen Warren Tested-by: Simon Glass Acked-by: Simon Glass Signed-off-by: Tom Warren

tegra2: Enable MMC for Seaboard

2011-10-27T19:56:29Z

This adds the required GPIO and pinmux configuration to make eMMC / SD work on Seaboard. Signed-off-by: Simon Glass Tested-by: Tom Warren