u-boot.git/board/nxp, branch next

Merge tag 'v2026.07-rc3' into next

2026-05-25T17:35:35Z

Prepare v2026.07-rc3

board: nxp: imx9{4, 5, 52}_evk: Add qb save option in SPL

2026-05-15T20:31:39Z

Call qb save automatically in the board-specific spl_board_init(), if SPL_IMX_QB option is enabled. This makes sure qb_save is called before any image loading is done by the SPL. This option is also suitable for the case where U-Boot proper is missing (Falcon mode). qb save refers to saving DDR training data to NVM, so that OEI runs Quickboot flow on next reboot, skipping full training and achieveing a lower boot time. Signed-off-by: Simona Toaca

imx8mp_evk: Fix the ND mode VDD_SOC voltage

2026-05-15T20:31:39Z

The 'CONFIG_IS_ENBLAED' check only works when there is a CONFIG_SPL_IMX8M_VDD_SOC_850MV config a option is defined and enabled. So use the 'IS_ENABLED' macro instead to fix the ND mode VDD_SOC voltage. Signed-off-by: Jacky Bai Signed-off-by: Ye Li Reviewed-by: Peng Fan

board: nxp: common: support CONFIG_FSL_USE_PCA9547_MUX

2026-05-15T11:28:31Z

Use select_i2c_ch_pca9547() only when CONFIG_FSL_USE_PCA9547_MUX is set, but several call in board/nxp/lx2160a/lx2160a.c invoke it unconditionally, or using unrelated Kconfigs (CONFIG_EMC2305, CONFIG_VID). Compilation with LX2160A target that omits the mux therefore fails with error: implicit declaration of function 'select_i2c_ch_pca9547' Add a static inline stub with -EOPNOTSUPP for the !CONFIG_FSL_USE_PCA9547_MUX case so all cases compile cleanly. Adapted from the convention used by include/scmi_nxp_protocols.h for SCMI subprotocol stubs. There is no functional change for NXP boards: all eight upstream LX2160A defconfigs (lx2160ardb / lx2160aqds / lx2162aqds and their secure / stmm / verified_boot variants) already set CONFIG_FSL_USE_PCA9547_MUX=y, so the real declaration wins. The purpose is to support new boards that do not use the PCA9547. Signed-off-by: Vincent Jardin Reviewed-by: Peng Fan Signed-off-by: Peng Fan

board: nxp: lx2160a: without QIXIS, MC-ENET, PCI, LTC3882

2026-05-15T11:28:31Z

The shared LX2160A board file calls helpers that only exist when their subsystem is enabled. Gate them on the matching CONFIG_*: - pci_init() under CONFIG_PCI. - fdt_fixup_mc_ddr() and fsl_rgmii_init() under CONFIG_FSL_MC_ENET. - qixis_*() and the QIXIS branch of checkboard() under CONFIG_FSL_QIXIS; cpu_name(buf) moves out so the non-QIXIS path still prints "Board: ". - EVENT_SPY_SIMPLE on init_func_vid moves inside the CONFIG_VOL_MONITOR_LTC3882_READ guard (was outside, dangling symbol when LTC3882 off). #if / #ifdef, not IS_ENABLED(), because the helpers are themselves conditionally compiled. While here, lx2160a_common.h: fix BOOT_TARGET_DEVICES_MMC 1 arg vs 2 args and gate the MMC target on CONFIG_CMD_MMC, not CONFIG_MMC. No functional change for NXP boards: LX2160ARDB, LX2160AQDS, or LX2162AQDS, but mainly build clean up in order to support other NXP lx2160a boards without those HW dependencies. Signed-off-by: Vincent Jardin Signed-off-by: Peng Fan

board: nxp: Fix OOB read in ft_board_setup

2026-05-15T11:28:31Z

base and size arrays can both contain up to total_memory_banks elements. This commit fixes the for loop condition to ensure that it does not attempt to read past the end of both arrays. Signed-off-by: Francois Berder Signed-off-by: Peng Fan

p2041rdb: convert README to rst

2026-05-15T11:28:31Z

Convert the README to reST format. Signed-off-by: Michael Walle Signed-off-by: Peng Fan

p2041rdb: update README and fix typos

2026-05-15T11:28:30Z

Nowadays, u-boot can build the pbl image itself. Refer to that image in the documentation. Also fix some typos. Signed-off-by: Michael Walle Signed-off-by: Peng Fan

p2041rdb: support SDcard boot

2026-05-15T11:28:30Z

The RCW was just supporting SPI boot. Add a second one for the SDcard boot. While at it, use the same naming scheme as for the other NXP boards. Signed-off-by: Michael Walle Signed-off-by: Peng Fan

boards/nxp: remove empty fdt_fixup_board_enet()

2026-05-15T11:28:30Z

Remove any empty function which is just called by the board code. There is no need to define this function at all. Signed-off-by: Michael Walle Signed-off-by: Peng Fan