u-boot.git/board/phytec/phycore_am64x/phycore_am64x.env, branch main

board: Correct usage of fdtfile=CONFIG_DEFAULT_FDT_FILE

2026-02-23T21:30:34Z

As explained in commit 03d2d5fc003f ("board: sifive: unmatched: set fdtfile with unquoted variable.") using the syntax of 'fdtfile=CONFIG_DEFAULT_FDT_FILE' in the plain text environment files will lead to extraneous and problematic "s in the output. This is fixed by using fdtfile=DEFAULT_FDT_FILE which was introduced recently. Acked-by: Peng Fan Signed-off-by: Tom Rini

Merge tag 'u-boot-socfpga-next-20250930' of https://source.denx.de/u-boot/custodians/u-boot-socfpga into next

2025-09-30T22:11:23Z

SoCFPGA updates for v2025.10: CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/27762 This pull request brings a set of updates across SoCFPGA platforms covering Agilex5, Agilex7, N5X, and Stratix10. The changes include: * Agilex5 enhancements: - USB3.1 enablement and DWC3 host driver support - System Manager register configuration for USB3 - Watchdog timeout increase and SDMMC clock API integration - dcache handling improvements in SMC mailbox path - Enable SPL_SYS_DCACHE_OFF in defconfig * Clock driver improvements: - Introduce dt-bindings header for Agilex clocks - Add enable/disable API and EMAC clock selection fixes - Replace manual shifts with FIELD_GET usage * DDR updates: - IOSSM mailbox compatibility check - Correct DDR calibration status handling * Device tree changes: - Agilex5: disable cache allocation for reads - Stratix10: add NAND IP node - Enable driver model watchdog - Enable USB3.1 node for Agilex5 * Config cleanups: - Simplify Agilex7 VAB defconfig - Remove obsolete SYS_BOOTM_LEN from N5X VAB config - Enable CRC32 support for SoCFPGA - Increase USB hub debounce timeout Overall this set improves reliability of DDR and cache flows, adds missing USB and MMC features for Agilex5, and refines clock and configuration handling across platforms. This patch set has been tested on Agilex 5 devkit, and Agilex devkit.

board: phytec: phycore_am6xx: Update scriptaddr

2025-09-24T13:50:13Z

After switching our boards to standard boot, we observed that the kernel hangs when booting with the "script" boot method over the network. The original scriptaddr value was copied from ti_common.env and remained unused for some time. On phycore-am62x and phycore-am62ax, however, this address conflicts with the current location where ATF is loaded (CONFIG_K3_ATF_LOAD_ADDR). Move scriptaddr to 0x89100000, directly after fdtoverlay_addr_r. The phycore-am64x is not affected by this issue, but we update it as well to keep all phycore-am6xx boards consistent. Signed-off-by: Wadim Egorov Reviewed-by: Anshul Dalal

Merge tag 'v2025.10-rc3' into next

2025-08-25T19:28:49Z

Prepare v2025.10-rc3

board: phytec: phycore_am6xx: Add rauc to bootmeths

2025-08-25T16:15:16Z

Add rauc to bootmeths variable if BOOTMETH_RAUC is enabled. This is setting a proper default for RAUC enabled systems. Signed-off-by: Wadim Egorov Reviewed-by: Martin Schwan

board: phytec: phycore-am64x: Add watchdog start to bootcmd

2025-08-11T20:53:56Z

Allows run-time control over watchdog auto-start and the timeout via setting the environment variable watchdog_timeout_ms. A value of zero means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value. Users can enable the watchdog to monitor the boot process until userspace or OS takes over to serve the watchdog. Signed-off-by: Wadim Egorov

board: phytec: phycore_am6xx: Set bootmeths & boot_targets environment

2025-05-22T19:51:55Z

As part of our migration to the standard boot process, configure the default values for the bootmeths and boot_targets environment variables. Signed-off-by: Wadim Egorov

board: phytec: phycore_am64x: Update environment for fitboot

2025-05-22T19:51:55Z

Add fit_addr_r to the environment to allow us to boot from a FIT image. Signed-off-by: Nathan Morrisson Signed-off-by: Wadim Egorov

board: Phytec: phycore_am64x: Increase size for Image in SPI

2025-02-20T22:13:20Z

Increase the maximum Image size from 23 MB to 26 MB by moving the initramfs start address up. This gives us a bigger ranger to provide kernel images which are not stripped down too much. Signed-off-by: Daniel Schultz Reviewed-by: Wadim Egorov

board: phytec: phycore_am64x: Add Network/SPI Boot

2024-09-10T19:16:01Z

Include the boot logic to boot via Network or from a OSPI/QSPI NOR flash. Moreover, set all required variables to both boot methods to the environment. Note: The phyBOARD-Electra AM64x is not able to load the U-Boot via Network. However, it's still possible to load the kernel. Signed-off-by: Daniel Schultz