u-boot.git/board/phytec, branch v2013.10

pcm051/igep0033: Supply bd_ram_ofs for cpsw driver

2013-10-07T11:43:46+00:00

Since 2bf36ac638ab2db9f0295aa47064976eeebf80c1 the BD ram address is
not hardcoded inside cpsw driver any more. Platforms have to supply
their bd_ram_ofs in the platform data to the driver. This commit does
this for pcm051 and igep0033 boards.

Tested-by: Enric Balletbo i Serra 
Acked-by: Mugunthan V N 
Signed-off-by: Lars Poeschel

arm, am33xx: add defines for gmii_sel_register bits

2013-08-28T15:44:59+00:00

Signed-off-by: Heiko Schocher 
Acked-by: Mugunthan V N

am33xx: Stop using PHYS_DRAM_1 define

2013-08-15T22:38:35+00:00

We defined PHYS_DRAM_1 to 0x80000000 (start of DRAM) and then used this
for CONFIG_SYS_SDRAM_BASE.  But then we kept on referencing PHYS_DRAM_1
in other places.  Change to directly setting CONFIG_SYS_DRAM_BASE and
then using that name in code.

Signed-off-by: Tom Rini

ARM: AM33xx: Move s_init to a common place

2013-08-15T12:51:10+00:00

s_init has the same outline for all the AM33xx based
board. So making it generic.
This also helps in addition of new Soc with minimal changes.

Signed-off-by: Lokesh Vutla 
Signed-off-by: Heiko Schocher 
Signed-off-by: Tom Rini 
Tested-by: Heiko Schocher 
Acked-by: Heiko Schocher

ARM: AM33xx: Cleanup dplls data

2013-08-15T12:51:10+00:00

Locking sequence for all the dplls is same.
In the current code same sequence is done repeatedly
for each dpll. Instead have a generic function
for locking dplls and pass dpll data to that function.

This is derived from OMAP4 boards.

Signed-off-by: Lokesh Vutla 
Tested-by: Heiko Schocher 
Acked-by: Heiko Schocher

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

arm, am33xx: move uart soft reset code to common place

2013-06-18T14:40:06+00:00

move uart soft reset code to common place and call
this function from board code, instead of copy and paste
this code for every board.

Signed-off-by: Heiko Schocher 
Cc: Matt Porter 
Cc: Lars Poeschel 
Cc: Tom Rini 
Cc: Enric Balletbo i Serra 
Acked-by: Tom Rini 
[trini: Fix igep0033 build, remove 'regval' on pcm051]
Signed-off-by: Tom Rini

arm, am33xx: move rtc32k_enable() to common place

2013-06-18T13:12:38+00:00

move rtc32k_enable() to common place so all am33xx boards can use it.

Signed-off-by: Heiko Schocher 
Cc: Matt Porter 
Cc: Lars Poeschel 
Cc: Tom Rini 
Cc: Enric Balletbo i Serra

am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c

2013-06-05T12:46:49+00:00

We need to call the save_omap_boot_params function on am33xx/ti81xx and
other newer TI SoCs, so move the function to boot-common.  Only OMAP4+
has the omap_hw_init_context function so add ifdefs to not call it on
am33xx/ti81xx.  Call save_omap_boot_params from s_init on am33xx/ti81xx
boards.

Reviewed-by: R Sricharan 
Signed-off-by: Tom Rini

pcm051: Enable DDR PHY dynamic power down bit

2013-04-08T15:29:04+00:00

This is done already for am335x in
59dcf970d11ebff5d9f4bbbde79fda584e9e7ad4 and also applies for pcm051.

It powers down the IO receiver when not performing read which helps
reducing the overall power consuption in low power states
(suspend/standby).

Signed-off-by: Lars Poeschel