u-boot.git/board/phytec, branch v2019.10

env: Rename environment.h to env_internal.h

2019-08-11T23:27:31Z

This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass Acked-by: Joe Hershberger Reviewed-by: Simon Goldschmidt [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini

env: Drop environment.h header file where not needed

2019-08-11T20:43:41Z

This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger Signed-off-by: Simon Glass

env: Move get/set_default_env() to env.h

2019-08-11T20:43:41Z

Move these functions to the new header file and rename set_default_env() to env_set_default() so that it has a consistent env_ prefix. Acked-by: Joe Hershberger Signed-off-by: Simon Glass

env: Move env_set() to env.h

2019-08-11T20:43:41Z

Move env_set() over to the new header file. Acked-by: Joe Hershberger Signed-off-by: Simon Glass

rockchip: rk3288: Move rk3288_detect_reset_reason to soc file

2019-07-29T02:27:45Z

The rk3288_detect_reset_reason() is per-SoC operation, move it to rk3288.c, and extend the rk_board_late_init() with rk3288_board_late_init() to make all the board works fine as before. Signed-off-by: Kever Yang

rockchip: rk3288-phycore: move phycore_init() to its own board file

2019-07-29T02:25:27Z

phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: Kever Yang

ARM: am335x: Add phyCORE AM335x R2 support

2019-07-13T15:11:28Z

Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec phyBOARD-Wega AM335x. CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-WEGA DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit 37624b58542f ("Linux 5.1-rc7") Signed-off-by: Niel Fourie Signed-off-by: Parthiban Nallathambi Reviewed-by: Heiko Schocher Reviewed-by: Tom Rini Tested-by: Marek Vasut

Convert to use fsl_esdhc_imx for i.MX platforms

2019-06-23T06:18:34Z

Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu Tested-by: Steffen Dirkwinkel Reviewed-by: Peng Fan Reviewed-by: Lukasz Majewski Reviewed-by: Martyn Welch Acked-by: Jason Liu

imx: Extend PCL063 support for phyCORE-i.MX6ULL SOM

2019-06-11T08:42:48Z

Extend PHYTEC phyBOARD-i.MX6UL for phyCORE-i.MX6UL SoM (PCL063) with eMMC on SoM. CPU: Freescale i.MX6ULL rev1.0 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 38C Reset cause: POR Model: Phytec phyBOARD-i.MX6ULL-Segin SBC Board: PHYTEC phyCORE-i.MX6ULL DRAM: 256 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial@02020000 Out: serial@02020000 Err: serial@02020000 Net: FEC0 Working: - Eth0 - i2C - MMC/SD - eMMC - UART (1 & 5) - USB (host & otg) Signed-off-by: Parthiban Nallathambi

ARM: dts: i.MX6ULL: U-Boot specific dts for u-boot, dm-spl

2019-06-11T08:42:48Z

u-boot,dm-spl property is specific to U-Boot, so created one for i.MX6ULL platforms. Signed-off-by: Parthiban Nallathambi