u-boot.git/board/phytec, branch v2024.04

board: phytec: define get_som_type also when SoM detection is disabled

2024-03-17T20:59:11Z

define the phytec_get_som_type function also when the SoM detection is disabled. Fixes: commit 110d321a56c3 ("board: phytec: common: phytec_som_detection: Add phytec_get_som_type") Signed-off-by: Benjamin Hahn

board: phycore_imx8mp: Use 2GHz RAM timings for PCL-070 from pcb_rev 1

2024-03-11T11:42:44Z

We need to differ between PCL-070 and PCM-070. PCL-070 supports 2GHz RAM timings from pcb rev 1 or newer. PCM-070 supports 2GHz RAM timings from pcb rev 3 or newer. Signed-off-by: Benjamin Hahn

board: phytec: common: phytec_som_detection: Add phytec_get_som_type

2024-03-11T11:42:44Z

Add a function that gets the som_type from the EEPROM. Add an enum for the som_type. Signed-off-by: Benjamin Hahn

imx9: Fix OP-TEE support

2024-03-04T11:18:13Z

This fixes OP-TEE support by: - Adding tee.bin to container.cfg - Starting ELE RNG in SPL Signed-off-by: Mathieu Othacehe

imx93: Use a header for imx9_probe_mu declaration

2024-02-10T18:16:13Z

Put imx9_probe_mu declaration in a new mu.h header file. Signed-off-by: Mathieu Othacehe Reviewed-by: Igor Opaniuk

phycore-imx8mp: add support for booting and flashing emmc via UUU

2024-02-08T13:11:46Z

add support for Serial Downloader Boot via UUU as well as flashing emmc via UUU on USB0 Port of phyBOARD Pollux. Reviewed-by: Fabio Estevam Signed-off-by: Benjamin Hahn

board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support

2024-02-08T12:05:11Z

Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on the PHYTEC phyCORE-i.MX93 SoM. Supported features: - 1GB LPDDR4 RAM - eMMC - external SD - FEC Ethernet - debug UART - watchdog Signed-off-by: Mathieu Othacehe Tested-by: Primoz Fiser Reviewed-by: Yannic Moog

board: ti: *-cfg.yaml: Adhere to yamllint rules

2024-01-18T22:50:26Z

Clean up all configuration files to adhere to yamllint rules. Signed-off-by: Neha Malcom Francis [trini: Update more yaml files added since this was posted] Signed-off-by: Tom Rini Suggested-by: Nishanth Menon

board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM

2024-01-16T17:00:05Z

Add basic support for PHYTEC phyCORE-AM62x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - OSPI NOR Flash - external uSD - Ethernet - debug UART Product page SoM: https://www.phytec.com/product/phycore-am62x Device trees were taken from Linux v6.7-rc3. Signed-off-by: Wadim Egorov Reviewed-by: Dhruva Gole

board: phytec: fix link error when disabling PHYTEC_SOM_DETECTION

2024-01-15T09:35:50Z

Commit aa7858fe5e2e ("board: phytec: som_detection: move definitions to source file") moved function definitions from header to source file. Makefile however was not updated to unconditionally (from [..]_SOM_DETECTION) build the imx8 and phytec som detection units. Also remove unused includes that cause build failures on arm 32bit boards. SoM detection shall support 32bit boards as well, but arch specific code should not be included in the generic module. Fixes: aa7858fe5e2e ("board: phytec: som_detection: move definitions to source file") Signed-off-by: Yannic Moog