u-boot.git/board/phytec, branch v2025.01 Unnamed repository; edit this file 'description' to name the repository. board: phytec: common: k3: Apply SoM-specific overlays to OS device tree 2024-11-14T16:46:22+00:00 Wadim Egorov w.egorov@phytec.de 2024-10-30T16:48:15+00:00 a6870706640aa4e775a4f05f3c85e47e0d3e4b85 Our SoMs are available in multiple configurations, managed via device tree overlays. To determine the specific variant in use, we read the EEPROM and apply the appropriate overlays during boot to the device tree used by the OS. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Neha Malcom Francis <n-francis@ti.com> 
Our SoMs are available in multiple configurations, managed via device
tree overlays. To determine the specific variant in use, we read the
EEPROM and apply the appropriate overlays during boot to the device tree
used by the OS.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Neha Malcom Francis <n-francis@ti.com>
board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD 2024-10-11T17:44:48+00:00 Simon Glass sjg@chromium.org 2024-09-30T01:49:47+00:00 dac3ce976a9b06be5aadbd857c4b64a8c521c6d4 Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass <sjg@chromium.org> 
Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass <sjg@chromium.org>
imx9: clock: Update clock init function and sequence 2024-09-19T03:12:41+00:00 Ye Li ye.li@nxp.com 2024-09-19T04:01:27+00:00 7872a986e5834bcc387788968e7f9f520f2cb140 Since we use SPEED GRADE fuse to set A55 frequency, remove the set_arm_core_low_drive_clk function which has hard coded frequency. And adjust clock_init called sequence and split it to early and late functions. Set the authen register in early function, because CCF driver checks NS bit. Set bus and core clock in late function, because the fuse read and SoC type/rev depend on ELE. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> 
Since we use SPEED GRADE fuse to set A55 frequency, remove the
set_arm_core_low_drive_clk function which has hard coded frequency.
And adjust clock_init called sequence and split it to early and late
functions.
Set the authen register in early function, because CCF driver checks
NS bit.
Set bus and core clock in late function, because the fuse read and
SoC type/rev depend on ELE.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Merge patch series "phycore-am62/4: Add more boot sources" 2024-09-10T20:56:12+00:00 Tom Rini trini@konsulko.com 2024-09-10T19:16:59+00:00 78d898eec080b02059c8dc09318b8761044fea85 Daniel Schultz <d.schultz@phytec.de> says: This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot sources: - Load U-Boot with USB DFU - Load a Linux and initramfs from OSPI/QSPI NOR flash - Load a Linux and rootfs from Network Moreover, it adds required changes to the environment to boot an A/B system with RAUC and includes some minor fixes. 
Daniel Schultz <d.schultz@phytec.de> says:

This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot
sources:

  - Load U-Boot with USB DFU
  - Load a Linux and initramfs from OSPI/QSPI NOR flash
  - Load a Linux and rootfs from Network

Moreover, it adds required changes to the environment to boot an A/B
system with RAUC and includes some minor fixes.
board: phytec: phycore_am64x: Add Network/SPI Boot 2024-09-10T19:16:01+00:00 Daniel Schultz d.schultz@phytec.de 2024-08-30T09:09:34+00:00 11b8fa00953b678fe68de0297c58de5d048159bc Include the boot logic to boot via Network or from a OSPI/QSPI NOR flash. Moreover, set all required variables to both boot methods to the environment. Note: The phyBOARD-Electra AM64x is not able to load the U-Boot via Network. However, it's still possible to load the kernel. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> 
Include the boot logic to boot via Network or from a OSPI/QSPI
NOR flash. Moreover, set all required variables to both boot
methods to the environment.

Note: The phyBOARD-Electra AM64x is not able to load the U-Boot
via Network. However, it's still possible to load the kernel.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
board: phytec: phycore_am62x: Add Network/SPI Boot 2024-09-10T19:16:01+00:00 Daniel Schultz d.schultz@phytec.de 2024-08-30T09:09:33+00:00 a48cbaeecbfa9ed8e3cd0ec5e1249786d8e4ed5f Include the boot logic to boot via Network or from a OSPI/QSPI NOR flash. Moreover, set all required variables to both boot methods to the environment. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> 
Include the boot logic to boot via Network or from a OSPI/QSPI
NOR flash. Moreover, set all required variables to both boot
methods to the environment.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
board: phytec: phycore_imx8mp: Add mtd spi partitions 2024-08-30T18:50:36+00:00 Benjamin Hahn B.Hahn@phytec.de 2024-08-26T16:49:06+00:00 8412acec9569181ea5b3ec56d3ed95fc73cf0c4e Depending on if a SPI-NOR flash is populated add the mtd partition table to the device tree. For this we have to also probe the flash before booting. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de> 
Depending on if a SPI-NOR flash is populated add the mtd partition
table to the device tree. For this we have to also probe the
flash before booting.

Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
board: phytec: phycore_imx8mp: Add mcore support 2024-08-23T17:53:07+00:00 Yashwanth Varakala y.varakala@phytec.de 2024-08-20T15:46:29+00:00 f0f5ab50c2c534111d24652444e77700dffd2f90 Added m7 core support in uboot for imx8mp by adding the boot variable prepare_mcore. Based on commit 0ed32cc8568a ("LF-6555 imx8m[m/n/p/q]_evk: add bootargs to support mcore") Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de> 
Added m7 core support in uboot for imx8mp by adding
the boot variable prepare_mcore.

Based on commit 0ed32cc8568a ("LF-6555 imx8m[m/n/p/q]_evk: add
bootargs to support mcore")

Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
board: phytec: phycore_am64x: Use k3_mmc.env logic 2024-07-22T19:47:57+00:00 Daniel Schultz d.schultz@phytec.de 2024-07-17T05:11:34+00:00 f1296bfff71b0cbac2241c0d6f1a88468c5af16d Use our common environment file to implement MMC boot. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> 
Use our common environment file to implement MMC boot.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
board: phytec: phycore_am62x: Use k3_mmc.env logic 2024-07-22T19:47:57+00:00 Daniel Schultz d.schultz@phytec.de 2024-07-17T05:11:33+00:00 ed9a91fd511bc128d60406d3c47cd0cd75aaea11 Use our common environment file to implement MMC boot. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> 
Use our common environment file to implement MMC boot.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>