u-boot.git/board/phytec, branch v2026.04

Merge patch series "arm: mach-k3: j721s2: Provide a way to obtain boot device for non SPLs"

2026-02-02T19:39:52Z

This series from Dominik Haller provides a way for TI K3 platforms to determine their boot device outside of SPL and then adds support for the PHYTEC phyCORE-AM68x/TDA4x SoM. Link: https://lore.kernel.org/r/20260116014116.767555-1-d.haller@phytec.de

doc: board: phytec: Add phyCORE-AM68x/TDA4x

2026-02-02T19:39:42Z

Add documentation for the PHYTEC phyCORE-AM68x/TDA4x (J721S2 family) SoM. Signed-off-by: Dominik Haller Reviewed-by: Wadim Egorov

board: phytec: Add PHYTEC phyCORE-AM68x/TDA4x SoM

2026-02-02T19:39:42Z

Add support for the PHYTEC phyCORE-AM68x/TDA4x (J721S2 family) SoM. Supported features: - 4GB LPDDR4 RAM - eMMC - SD-Card - Ethernet - OSPI - AVS - debug UART Signed-off-by: Dominik Haller Reviewed-by: Wadim Egorov

board: phytec: Add PHYTEC mailing list to MAINTAINERS entries

2026-01-21T18:05:15Z

PHYTEC maintains an actively monitored mailing list for upstream activities: upstream@lists.phytec.de. Add it to the MAINTAINERS entries for PHYTEC boards we actively develop and contribute to. Signed-off-by: Wadim Egorov Acked-by: Teresa Remmet

Merge patch series "board: phytec: phytec_som_detection: Add missing assignment"

2025-12-07T14:07:36Z

This series from Daniel Schultz lays the groundwork for the phyFLEX SOMs from phytec. Link: https://lore.kernel.org/r/20251124082506.3376876-1-d.schultz@phytec.de

board: phytec: phytec_som_detection: Add support for phyFLEX

2025-12-07T14:07:07Z

phyFLEX are SoMs based on the FPSC standard. Add additional "SOM types" for the phyFLEX modules base on the FPSC Gamma specification. These modules come in four different variants; prototypes (PT), standard product (SP), KSP (KP) and KSM (KM). Signed-off-by: Daniel Schultz Reviewed-by: Teresa Remmet Tested-by: Dominik Haller

board: phytec: phytec_som_detection: Add missing assignment

2025-12-07T14:07:07Z

Assign the return value of snprintf (total length) to a variable to properly check if the string has the correct length. Currently, this variable is always zero and the length check after snprintf will always fail. Signed-off-by: Daniel Schultz

board: phytec: phycore-imx93: env: Add required uuu variables

2025-12-06T18:26:07Z

Add variable 'emmc_dev' and 'sd_dev' required for NXP uuu flash scripts. Signed-off-by: Primoz Fiser

board: phytec: phycore-imx93: Set boot_targets dynamically

2025-12-06T18:26:07Z

Set boot_targets environment variable dynamically, so that when booting from SD-card, boot binaries are also preferably fetched from the SD-card by default. If the user decides to set their own boot_targets, we should not overwrite them. Signed-off-by: Primoz Fiser Reviewed-by: Wadim Egorov

board: phytec: phycore-imx93: Switch to standard boot

2025-12-06T18:26:07Z

Enable standard boot for the phyCORE-i.MX93 board and use it as a new default. Add required standard boot variables to the environment, while removing old boot scripts and now unnecessary environment variables. Adjust variables according to the requirements of PHYTEC ampliphy-boot distro-boot. Last but not least, order environment vars by alphabet and run 'make savedefconfig' to resync defconfig. Signed-off-by: Primoz Fiser Reviewed-by: Wadim Egorov