RK3588-based devices now support creating DRAM banks with proper holes
by reading the ATAGS from Rockchip TPL blob, so let's use that mechanism
instead.

Since ft_board_setup isn't defined anymore, there's no need for
selecting CONFIG_OF_BOARD_SETUP.

Similarly, because the quartzpro64-rk3588.c would be empty, it is simply
removed, with the (would-be-empty) Makefile as well.

The CONFIG_NR_DRAM_BANK now defaults to 10 which is a safe bet for
reading banks from ATAGS, so let's use the default value instead.

Co-developed-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Please pull the updates for rockchip platform:
- Add board: rk3588 Generic, Cool Pi CM5, Theobroma-Systems RK3588 Jaguar SBC,
             Toybrick TB-RK3588X;
             rk3588s Cool Pi 4B;
             rk3566 Pine64 PineTab2;
- Add saradc v2 support;
- Add PMIC RK806 support;
- rk3588 disable force_jtag by default;
- Migrate to use IO-domain driver for all boards;
- Use common bss and stack addresses for rk33xx and rk35xx boards;
- Other updates for driver, config and dts;

Switch to use the IO-domain driver to configure IO-domain based on
device tree instead of a setup_iodomain() function.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Switch to use the IO-domain driver to configure IO-domain based on
device tree instead of a setup_iodomain() function.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Switch to use the IO-domain driver to configure IO-domain based on
device tree instead of a setup_iodomain() function.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

These functions is excluded from SPL build and BOARD_EARLY_INIT_F is not
enabled for any of the affected boards, so this legacy code is not used.

Rockchip common board code already enable all regulators flagged as
always-on or boot-on in device tree, and fixed/gpio regulators now have
basic reference counting support so the original intent of this code is
no longer valid.

Remove the unneeded and unused code that used to enable usb regulators.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Add myself as a reviewer for RK3399 boards that I have and can help with
review and testing of defconfig and device tree changes.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Update MAINTAINERS files for RK3399 boards to include related device
tree files. Also correct a few filenames.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

The Pine64 PineTab2 is a tablet computer based on the Rockchip RK3566
SoC. The table features 4/8 GB LPDDR4 RAM and 64/128 GB eMMC storage.

Features tested on a Pine64 PineTab2 8GB v2.0:
- SD-card boot
- eMMC boot
- SPI Flash boot
- USB host

Device tree is imported from linux maintainer branch v6.9-armsoc/dts64,
commit 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64
PineTab2").

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

While there are currently uses for a stanza of "config BOARD_SPECIFIC_OPTIONS"
followed by "def_bool y" and a series of select/imply statements, having
this option set followed by nothing else doesn't provide anything.
Remove these stanzas.

Signed-off-by: Tom Rini <trini@konsulko.com>