u-boot.git/board/pine64, branch v2024.01

maintainers: rk3399: remove maintainer

2023-12-13T14:57:02Z

Remove Akash Gajjar from MAINTAINERS as email is bouncing. Signed-off-by: Shantur Rathore Reviewed-by: Kever Yang

board: rockchip: add Pine64 QuartzPro64 RK3588 board

2023-11-09T03:19:05Z

QuartzPro64 is a Rockchip RK3588 based SBC by Pine64. UART and boot over SD/eMMC/RJ45 are tested to work. Linux commits from next-20231013: 8152d3d070a9 ("arm64: dts: rockchip: Add QuartzPro64 SBC device tree") Signed-off-by: Tom Fitzhenry Reviewed-by: Kever Yang Cc: Eugen Hristev Cc: Jonas Karlman Cc: Ondrej Jirman

board: Remove essentially empty board files and Makefiles

2023-10-09T19:24:31Z

As part of reviewing a new platform, Daniel Schwierzeck noted that we can have an empty Makefile in the board directory and don't need an empty board.c file as well. Further with further cleanup in the Makefile we can now omit the Makefile entirely. Remove a number of now unnecessary board.c and Makefiles. Signed-off-by: Tom Rini

common: Drop linux/printk.h from common header

2023-09-24T13:54:57Z

This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass

board: rockchip: Add Pine64 SOQuartz on CM4-IO

2023-07-31T06:41:36Z

The Pine64 SOQuartz compute module is mostly pin-compatible with the RPi CM4 form factor. Therefore, it can slot into the official Raspberry Pi CM4 IO carrier board. Add this configuration to U-Boot. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli Signed-off-by: Nicolas Frattaroli Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

board: rockchip: Add Pine64 SOQuartz on Blade

2023-07-31T06:41:35Z

The Pine64 SOQuartz Blade board is a carrier board for the SOQuartz CM4-compatible compute module. It features PoE, an M.2 slot, an SD card slot, HDMI, USB, serial and ethernet. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - PCIe/NVMe - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli Signed-off-by: Nicolas Frattaroli Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

board: rockchip: Add Pine64 SOQuartz on Model A

2023-07-31T06:41:35Z

The Pine64 SOQuartz Model A board is a carrier board for the SOQuartz CM4-compatible compute module. It exposes PCIe, ethernet, USB, HDMI, CSI, DSI, eDP and a 40 pin GPIO header, and is powered by 12V DC. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - PCIe/NVMe/AHCI - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli Signed-off-by: Nicolas Frattaroli Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

board: rockchip: Add Pine64 Quartz64-B Board

2023-07-31T06:41:35Z

The Pine64 Quartz64 Model B is a credit-card sized single-board computer based on the Rockchip RK3566 SoC. The board features an M.2 PCIe slot, USB3, USB2, eMMC, SD, ethernet, HDMI, analog audio out, a 40 pin GPIO header and a DSI and CSI port, as well as on-board Wi-Fi. Features tested on a Quartz64-B 4GB v1.4 2022-06-06: - SD-card boot - eMMC boot - SPI Flash boot - PCIe/NVMe - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli Signed-off-by: Nicolas Frattaroli Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

board: rockchip: Add Pine64 Quartz64-A Board

2023-07-31T06:41:35Z

The Pine64 Quartz64 Model A is a single-board computer based on the Rockchip RK3566 SoC. The board features USB3, SATA, PCIe, HDMI, USB2.0, CSI, DSI, eDP, eMMC, SD, and an e-paper parallel port, as well as a 20 pin GPIO header. Features tested on a Quartz64-A 8GB v2.0 2021-04-27: - SD-card boot - eMMC boot - PCIe/NVMe/AHCI - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli Signed-off-by: Nicolas Frattaroli Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

MAINTAINERS: Fix path typos and similar

2023-07-25T16:44:47Z

We have a number of cases where the in-tree path of files and where they presumably were when the first version of a patch were posted differ slightly. Correct these to point at where the files are now. Signed-off-by: Tom Rini Reviewed-by: Simon Glass