u-boot.git/board/qi, branch master

Revert "MIPS: Jz4740: Add qi_lb60 board support"

2013-07-15T13:19:39+00:00

The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were
licensed under the GPL v3 or later, and not v2 or later.  As this is
incompatible with the project, revert this board support until the
responsible parties are available to re-license (if so desired) under
GPL v2.

Signed-off-by: Tom Rini

MIPS: qi_lb60: remove custom u-boot.lds script

2013-01-30T23:27:58+00:00

Remove the board specific linker script. It is not
needed anymore, the unified MIPS linker script can
be used instead.

The qi_lb60 target produces a slightly different
image after the change than before. The value of
'num_got_entries' symbol is different:

    @@ -49,7 +49,7 @@
     801000b4:      80122d00        lb      s2,11520(zero)
     801000b8:      80123500        lb      s2,13568(zero)
     801000bc:      80123ef8        lb      s2,16120(zero)
    -801000c0:      00000139        0x139
    +801000c0:      00000136        tne     zero,zero,0x4

     801000c4 :
     801000c4:      8d0bfffc        lw      t3,-4(t0)

This is caused by the different placement of the
'__got_start' and '__got_end' symbols between the
board specific scrip and the unified script.

  board specific script:

        __got_start = .;
        .got  : { *(.got) }
        __got_end = .;

  unified script:
        .got  : {
                __got_start = .;
                *(.got)
                __got_end = .;
        }

Despite this difference, the resulting images are
functionally identical.

Signed-off-by: Gabor Juhos 
Cc: Daniel Schwierzeck 
Cc: Xiangfu Liu

MIPS: remove OUTPUT_FORMAT from linker scripts

2013-01-30T22:34:10+00:00

The OUTPUT_FORMAT command in linker scripts
was always misused due to some endianess and
toolchain problems.

Use GCC flags to ensure proper output format,
and get rid of the OUTPUT_FORMAT commands in
the board specific u-boot.lds files.

Signed-off-by: Gabor Juhos 
Cc: Daniel Schwierzeck 
Cc: Stefan Roese 
Cc: Wolfgang Denk 
Cc: Xiangfu Liu

common: Discard the __u_boot_cmd section

2012-10-22T15:29:42+00:00

The command declaration now uses the new LG-array method to generate
list of commands. Thus the __u_boot_cmd section is now superseded and
redundant and therefore can be removed. Also, remove externed symbols
associated with this section from include/command.h .

Signed-off-by: Marek Vasut 
Cc: Joe Hershberger 
Cc: Mike Frysinger

common: Add .u_boot_list into all linker files

2012-10-22T15:29:42+00:00

Add section for the linker-generated lists into all possible linker
files, so that everyone can easily use these lists. This is mostly
a mechanical adjustment.

Signed-off-by: Marek Vasut 
Cc: Joe Hershberger 
Cc: Mike Frysinger

dm: mips: Fix warnings in lb60 board

2012-08-17T18:13:48+00:00

The lb60 board accesses the clkgr register, which is 32bit via
16bit IO ops. This causes malfunction. Fix this.

qi_lb60.c: In function ‘cpm_init’:
qi_lb60.c:72:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
qi_lb60.c:84:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]

Signed-off-by: Marek Vasut 
Cc: Daniel 
Cc: Shinya Kuribayashi 
Cc: Xiangfu Liu

punt unused clean/distclean targets

2011-10-15T20:20:36+00:00

The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger

MIPS: Jz4740: Add qi_lb60 board support

2011-10-12T14:28:49+00:00

Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device
from Qi hardware:

http://en.qi-hardware.com/wiki/Ben_NanoNote
http://en.qi-hardware.com/wiki/Main_Page
http://en.wikipedia.org/wiki/Qi_hardware

This Jz4740-based clamshell device does not use NOR flash to boot.
The initial bring-up assumes that U-Boot is directly loaded into SDRAM
using USB boot tool, and starts from 0x80100000.

About USB boot tool
-------------------

Jz4740 is one of the XBurst processors with USB boot functionality
supported.  The CPU can boot from a small ROM in the LSI, initialize
CPU and USB module, then wait for USB commands from the USB host.
We can send 8 KB binary data to the CPU cache using USB boot tool.

USB boot tool is available to the public at Ingenic website.  Also
there is an alternative Debian package named xburst-tools.

Signed-off-by: Xiangfu Liu 
Acked-by: Daniel 
Signed-off-by: Shinya Kuribayashi