u-boot.git/board/radxa, branch master

rockchip: rock5b-rk3588: Add support for Radxa ROCK 5T

2025-12-13T16:02:10+00:00

Include the FDT for Radxa ROCK 5T in the FIT, in addition to those for
5B and 5B+, and add board selection code to load the 5T FDT when the
DRAM type is LPDDR5 and ADC channel 5 value is close to 1016.

Signed-off-by: FUKAUMI Naoki 
Reviewed-by: Kever Yang

rockchip: rock5b-rk3588: Add support for ROCK 5B+

2025-12-13T16:02:10+00:00

Include FDTs for both ROCK 5B and 5B+ in the FIT and add board selection
code to load the 5B+ FDT when the DRAM type is LPDDR5 and ADC channel 5
value is close to 4095.

  U-Boot 2025.07 (Jul 14 2025 - 21:28:20 +0000)

  Model: Radxa ROCK 5B+
  SoC:   RK3588
  DRAM:  8 GiB

Features tested on a ROCK 5B+ v1.2:
- SD-card boot
- eMMC boot
- SPI flash boot
- PCIe/NVMe
- Ethernet
- USB/TCPM

Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang

board: rockchip: Add Radxa ROCK 2A/2F

2025-11-02T18:15:23+00:00

The ROCK 2 Family is a high-performance SBC (Single Board Computer)
developed by Radxa, based on the Rockchip RK3528A.

The Radxa E20C shares some board characteristics with the ROCK 2 family
boards.

Add support for the ROCK 2A and 2F boards. The radxa-e20c-rk3528 target
is also extended to support booting ROCK 2 boards.

Features tested on a ROCK 2A v1.202:
- SD-card boot
- Ethernet
- USB host (with pending DT changes)

Features tested on a ROCK 2F v1.016:
- SD-card boot
- eMMC boot
- USB host (with pending DT changes)

Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang

board: rockpi4-rk3399: update email address for Christopher Obbard

2025-01-22T15:51:41+00:00

Update my email address.

Signed-off-by: Christopher Obbard

rockchip: rk3399-rock-pi-4: Fix Synchronous Abort

2025-01-11T00:56:22+00:00

After the commit 788cf33315c7 ("efi: add a helper to generate dynamic
UUIDs") update_info.num_images must match number of valid update images.

On Rock Pi 4 following Synchronous Abort can be observed due to fw_name
being NULL:

  Scanning global bootmeth 'efi_mgr':
  "Synchronous Abort" handler, esr 0x96000010, far 0x0
  elr: 0000000000200e28 lr : 000000000028adb8 (reloc)
  elr: 00000000f3efbe28 lr : 00000000f3f85db8
  x0 : 0000000000000000 x1 : ffffffffffffffff
  x2 : 0000000000000000 x3 : 000000000000000e
  x4 : 0000000000000000 x5 : 00000000f1ef0d78
  x6 : 00000000f3fb3b90 x7 : 0000000000000044
  x8 : 0000000000000010 x9 : 0000000000000031
  x10: 00000000f0ea3fff x11: 00000000f1f29e00
  x12: 0000000000000002 x13: fffffffffffff000
  x14: 00000000f1f29e00 x15: 0000000000000018
  x16: 00000000f3f44f7c x17: 0000000000000000
  x18: 00000000f1ef2de0 x19: 00000000f0ea3040
  x20: 00000000f3ff53d8 x21: 00000000f3fd0498
  x22: 0000000000000000 x23: 00000000f1edb960
  x24: 00000000f1edb95f x25: 00000000f1edb990
  x26: 00000000f1edb964 x27: 00000000f1edb998
  x28: 00000000f1edc1ec x29: 00000000f1edb820

  Code: aa0003e2 d2800000 eb01001f 54000060 (78607843)
  Resetting CPU ...

  resetting ...

Fix this by setting update_info.num_images to 0 when no valid update
images is added to update_info.

Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang 
Tested-by: FUKAUMI Naoki

rockchip: Add support for Radxa ROCK 5C

2025-01-11T00:56:17+00:00

Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.

[1] https://radxa.com/products/rock5/5c

Signed-off-by: FUKAUMI Naoki 
Reviewed-by: Kever Yang

board: rock5b-rk3588: enable USB-C in operating system

2024-10-17T01:12:47+00:00

Since older U-Boot releases do not negotiate USB PD, the kernel
DT may not enable the USB-C controller by default to avoid a
regression. The plan is to upstream it with 'status = "fail";'
instead. U-Boot should then mark it as 'status = "okay";' if
it negotiated USB PD. Currently existing upstream kernel DTs do
not yet have the USB-C controller at all, so we ignore any
failures.

Reviewed-by: Kever Yang 
Tested-by: Soeren Moch 
Tested-by: Anand Moon 
Reviewed-by: Jonas Karlman 
Signed-off-by: Sebastian Reichel

board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD

2024-10-11T17:44:48+00:00

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass

board: rockchip: Add Radxa ROCK 5 ITX

2024-08-12T07:43:44+00:00

The Rock 5 ITX is a board in ITX form factor using the RK3588 SoC

It can be powered either by 12V, ATX power-supply or PoE.

Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.

Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.

USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.

Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf

The naming scheme with the dashes follows Dragan's comment on the mainline
devicetree commit:
    "the name of this board deviates from the standard Radxa naming scheme,
     which is something like "ROCK " thus, "rock-5a" is
     fine, but it should be "rock-5-itx", simply because there's a space
     between "5" and "ITX" in "ROCK 5 ITX"

Signed-off-by: Heiko Stuebner 
Reviewed-by: Kever Yang 
Signed-off-by: Kever Yang

board: rockchip: Add Radxa ZERO 3W/3E

2024-08-09T10:35:23+00:00

The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
computer based on the Rockchip RK3566, with a compact form factor and
rich interfaces.

Implement rk_board_late_init() to set correct fdtfile env var and
board_fit_config_name_match() to load correct FIT config based on what
board is detected at runtime so a single board target can be used for
both board models.

Features tested on a ZERO 3W 8GB v1.11:
- SD-card boot
- eMMC boot
- USB gadget
- USB host

Features tested on a ZERO 3E 4GB v1.2:
- SD-card boot
- Ethernet
- USB gadget
- USB host

Signed-off-by: Jonas Karlman 
Tested-by: FUKAUMI Naoki 
Reviewed-by: Kever Yang