u-boot.git/board/raspberrypi, branch v2024.07

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

board: raspberrypi: Remove and add needed includes

2024-05-07T14:00:37Z

Remove from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini

rpi5: Use devicetree to retrieve board revision

2024-01-30T16:39:46Z

Firmware on RPi5 return error on board revision query through firmware interface, but on the other hand it fills "linux,revision" in "system" node, so use it to detect board revision. system { linux,revision = <0xc04170>; linux,serial = <0x6cf44e80 0x3c533ede>; }; Reviewed-by: Matthias Brugger Tested-by: Jens Maus Tested-by: Darko Alavanja Signed-off-by: Ivan T. Ivanov Signed-off-by: Matthias Brugger

arm: rpi: Switch to a text environment

2023-09-03T22:33:04Z

Use the new environment format so we can drop most of the config.h file. Signed-off-by: Simon Glass

common: return type board_get_usable_ram_top

2023-08-15T16:21:17Z

board_get_usable_ram_top() returns a physical address that is stored in gd->ram_top. The return type of the function should be phys_addr_t like the current type of gd->ram_top. Signed-off-by: Heinrich Schuchardt

rpi: set the correct parameter for simple framebuffer node

2023-08-13T21:57:46Z

When raspberrpi-4b platform boots up, there are 2 sets of same bootup log displayed on HDMI monitor screen, it looks like the screen is split into 2 parts. The root cause is that video format of u-boot is different from kernel. The fixing "a8r8g8b8" video format is used in u-boot, but "r5g6b5" video format from framebuffer node is used in kernel image. In order to avoid weird display status on screen, it needs to set the correct parameter for simple framebuffer node even if it has existed. Signed-off-by: Meng Li

rpi: Update the RPi Zero 2W DT filename

2023-03-14T12:12:13Z

Update the Raspberry Pi Zero 2W device tree file name to match what landed upstream. Signed-off-by: Peter Robinson

rpi: Copy eth PHY address from fw DT to loaded DT

2023-03-14T12:12:13Z

Some Raspberry Pi 400 boards, specifically rev 1.1, have a different address for the ethernet PHY device than what is provided by the kernel DTB. The correct address is provided by the firmware, so we should carry it over into the loaded device tree so that ethernet works on such boards. Signed-off-by: Antoine Mazeas Signed-off-by: Peter Robinson

rpi: Copy properties from firmware dtb to the loaded dtb

2023-03-14T12:12:13Z

The RPI firmware adjusts several property values in the dtb it passes to u-boot depending on the board/SoC revision. Inherit some of these when u-boot loads a dtb itself. Specificaly copy: * /model: The firmware provides a more specific string * /memreserve: The firmware defines a reserved range, better keep it * emmc2bus and pcie0 dma-ranges: The C0T revision of the bcm2711 Soc (as present on rpi 400 and some rpi 4B boards) has different values for these then the B0T revision. So these need to be adjusted to boot on these boards * blconfig: The firmware defines the memory area where the blconfig stored. Copy those over so it can be enabled. * /chosen/kaslr-seed: The firmware generates a kaslr seed, take advantage of that. Signed-off-by: Sjoerd Simons Signed-off-by: Antoine Mazeas Reviewed-by: Simon Glass Signed-off-by: Peter Robinson

MAINTAINERS: add RaspberryPi co-maintainer

2022-12-02T13:39:00Z

Peter accpeted to step up as a co-maintainer for the RPis. Reflect that in the corresponding MAINTAINERS files. Signed-off-by: Matthias Brugger Reviewed-by: Peter Robinson