u-boot.git/board/raspberrypi, branch v2024.10

Merge tag 'rpi-2024.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-raspberrypi

2024-07-12T17:06:10Z

Updates for RPi for 2024.10: - board: rpi: remove leftover CONFIG_HW_WATCHDOG block - arm: bcm283x: remove unused empty hw_watchdog_disable - board: raspberrypi: Fix format specifier for printing rev_scheme - Revert "arm: dts: bcm283x: Add minimal smbios information"

board: rpi: remove leftover CONFIG_HW_WATCHDOG block

2024-07-12T10:44:33Z

This was added in commit 45a6d231b2f (bcm2835_wdt: support for the BCM2835/2836 watchdog), which did do 'select HW_WATCHDOG'. That incarnation of the watchdog driver later got removed in c7adc0b5f98 (watchdog: bcm2835_wdt: Remove unused BCM283x watchdog driver and its references), but this block was left behind. Another rpi watchdog driver has since been added, but that does not select HW_WATCHDOG, so this remains dead and unused. Remove it. Reviewed-by: Stefan Roese Signed-off-by: Rasmus Villemoes Reviewed-by: Peter Robinson

board: raspberrypi: Fix format specifier for printing rev_scheme

2024-07-12T10:42:30Z

rev_scheme is an unsigned integer and must not be printed as a signed integer. Signed-off-by: Francois Berder Reviewed-by: Peter Robinson

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03Z

As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

board: raspberrypi: Remove and add needed includes

2024-05-07T14:00:37Z

Remove from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini

rpi5: Use devicetree to retrieve board revision

2024-01-30T16:39:46Z

Firmware on RPi5 return error on board revision query through firmware interface, but on the other hand it fills "linux,revision" in "system" node, so use it to detect board revision. system { linux,revision = <0xc04170>; linux,serial = <0x6cf44e80 0x3c533ede>; }; Reviewed-by: Matthias Brugger Tested-by: Jens Maus Tested-by: Darko Alavanja Signed-off-by: Ivan T. Ivanov Signed-off-by: Matthias Brugger

arm: rpi: Switch to a text environment

2023-09-03T22:33:04Z

Use the new environment format so we can drop most of the config.h file. Signed-off-by: Simon Glass

common: return type board_get_usable_ram_top

2023-08-15T16:21:17Z

board_get_usable_ram_top() returns a physical address that is stored in gd->ram_top. The return type of the function should be phys_addr_t like the current type of gd->ram_top. Signed-off-by: Heinrich Schuchardt

rpi: set the correct parameter for simple framebuffer node

2023-08-13T21:57:46Z

When raspberrpi-4b platform boots up, there are 2 sets of same bootup log displayed on HDMI monitor screen, it looks like the screen is split into 2 parts. The root cause is that video format of u-boot is different from kernel. The fixing "a8r8g8b8" video format is used in u-boot, but "r5g6b5" video format from framebuffer node is used in kernel image. In order to avoid weird display status on screen, it needs to set the correct parameter for simple framebuffer node even if it has existed. Signed-off-by: Meng Li