u-boot.git/board/renesas/r2dplus, branch master

treewide: Remove empty board_init() function from all boards

2025-07-24T19:30:19+00:00

Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.

This cleanup was made semi-automatically using these scripts: [1].

No functional change, but the binary size for the modified boards is
reduced a bit.

[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init

Signed-off-by: Sam Protsenko 
Tested-by: Adam Ford  #imx8mm_beacon
Tested-by: Bryan Brattlof 
Acked-by: Peng Fan   #NXP boards

ARM: renesas: Drop include common.h

2024-01-27T19:16:39+00:00

The header file is not necessary in either of those files,
remove it as common.h is going away.

Include missing asm/arch/rmobile.h in board/renesas/rcar-common/v3-common.c
to prevent build failure of r8a77970_eagle r8a779a0_falcon r8a77980_v3hsk
and r8a77970_v3msk .

Include missing asm/u-boot.h in falcon.c and grpeach.c to fix build failure
due to missing definition of struct bd_info . Include errno.h in grpeach.c
to fix build error due to missing definition of EINVAL.

Signed-off-by: Marek Vasut 
Reviewed-by: Paul Barker

ARM: renesas: Update MAINTAINERS file

2023-08-07T17:41:43+00:00

Update MAINTAINERS file. Add missing MAINTAINERS file for Spider,
Whitehawk and V3HSK boards. Update mail addresses. Add file globs
to match on DT and driver files related to these boards.

The GRPEACH and R2DPLUS are special in that they are not R-Car
and have their own set of specialized drivers.

Signed-off-by: Marek Vasut

treewide: convert bd_t to struct bd_info by coccinelle

2020-07-17T13:30:13+00:00

The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include 

  #include 
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  

Signed-off-by: Masahiro Yamada

sh: r2dplus: Enable board_eth_init only for non-DM case

2020-05-29T17:20:54+00:00

The board_eth_init() is not used for DM case, enable it only for
the non-DM case. This function should eventually be removed.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

common: Drop net.h from common header

2020-05-18T21:33:31+00:00

Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass

common: Move some board functions out of common.h

2019-12-02T23:25:21+00:00

A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

sh: r2dplus: Switch to DM PCI driver

2019-09-02T15:38:43+00:00

Add DT entry for the DM PCI driver, update board configs
and drop ad-hoc board init code for the PCI bus. Instead,
let the DM PCI driver initialize and operate the hardware.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

sh: add common dram_init() function for all boards

2016-12-03T02:32:51+00:00

Generic board support assumes a different method of specifying
DRAM size on board, also it can be shared among all boards, notably
only sh7763rdp board has a custom legacy dram_init(), however
the difference is only in printing some additional information,
this feature can be removed.

Signed-off-by: Vladimir Zapolskiy 
Reviewed-by: Simon Glass