u-boot.git/board/rockchip, branch v2017.09

env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()

2017-08-16T12:23:56Z

Rename this function for consistency with env_set(). Signed-off-by: Simon Glass

env: Rename setenv() to env_set()

2017-08-16T12:22:18Z

We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass

rockchip: remove the hard coded uart iomux setting for px5 evb

2017-08-13T15:12:37Z

As the debug uart is marked as dm-pre-reloc, the pinctrl driver will handle the correct iomux setting. Signed-off-by: Andy Yan Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich Reviewed-by: Simon Glass

rockchip: evb-rk3328: enable boot on regulator

2017-07-11T13:23:38Z

Enable all the boot-on regulator in default. Signed-off-by: Kever Yang Acked-by: Simon Glass Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich

rockchip: rk3328: board: add support of dwc2 gadget

2017-07-11T10:13:49Z

Probe dwc2 udc in the function of board_usb_start to enable usb gadget function. Signed-off-by: Meng Dongyang Reviewed-by: Simon Glass Reviewed-by: Philipp Tomsich Acked-by: Philipp Tomsich

rockchip: add evb_rk3229 board

2017-07-11T10:13:46Z

evb_rk3229 is a RK3229 based board, with: - 8GB eMMC; - 1GB DDR SDRAM; - 2 USB2.0 HOST port; - 1 MAC port; - 1 HDMI port; - IR; - WiFi; Signed-off-by: Kever Yang Reviewed-by: Philipp Tomsich

rockchip: correct the bank0 ram size

2017-07-11T10:13:45Z

The bank0 ram size should be the DRAM size minus reserved size, the DRAM size may be 1GB, 2GB, 4GB, we can not hard code it. Signed-off-by: Kever Yang Reviewed-by: Philipp Tomsich Added DECLARE_GLOBAL_DATA_PTR for RK3328, RK3368 and RK3399: Signed-off-by: Philipp Tomsich

rockchip: use common sdram function

2017-07-11T10:13:44Z

Replace the sdram_init() in board init and rockchip_sdram_size() in sdram driver for all the Rockchip SoCs which enable CONFIG_RAM. Signed-off-by: Kever Yang Reviewed-by: Philipp Tomsich Make dram_init() in rk3036-board.c conditional on CONFIG_RAM: Signed-off-by: Philipp Tomsich

rockchip: rk3328: don't implement usb_gadget_handle_interrupts twice

2017-06-08T03:12:52Z

The usb_gadget_handle_interrupts()-function is already implemented by drivers/usb/gadget/dwc2_udc_otg.c, so we need to avoid defining it in the evb-rk3328.c board-specific file. This change fixes the following build error (from buildman): drivers/usb/gadget/built-in.o: In function `usb_gadget_handle_interrupts': build/../drivers/usb/gadget/dwc2_udc_otg.c:850: multiple definition of `usb_gadget_handle_interrupts' board/rockchip/evb_rk3328/built-in.o:build/../board/rockchip/evb_rk3328/evb-rk3328.c:37: first defined here make[1]: *** [u-boot] Error 1 Signed-off-by: Philipp Tomsich Acked-by: Simon Glass

rockchip: Add basic support for evb-rv1108 board

2017-06-07T13:29:25Z

Add basic support for rv1108 evb, whith this patch we can boot into u-boot console. Signed-off-by: Andy Yan Reviewed-by: Simon Glass