u-boot.git/board/ronetix, branch v2010.09Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/ronetix?h=v2010.092010-07-12T07:14:29ZWrite MAC address automatically on MACB-based boards2010-07-12T07:14:29ZBen Warrenbiggerbadderben@gmail.com2010-06-01T18:55:42Zurn:sha1:6bb46790178d111161a487cbd847dd2dba37ca24
Also, remove all calls to eth_init() in boards that use MACB
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
add new board pm9g452010-06-06T13:36:28ZAsen Dimovdimov@ronetix.at2010-04-20T19:49:04Zurn:sha1:b5d289fc29842095d5cd0f82cceab1b0b2e824ba
Add the new board PM9G45 from Ronetix GmbH.
* AT91SAM9G45 MCU at 400Mhz.
* 128MB DDR2 SDRAM
* 256MB NAND
* 10/100 MBits Ethernet DP83848
* Serial number chip DS2401
The board is made as SODIMM200 module.
For more info www.ronatix.at or info@ronetix.at.
Signed-off-by: Asen Dimov <dimov@ronetix.at>
pm9263 converted to at91 soc access2010-04-30T10:23:26ZAsen Dimovdimov@ronetix.at2010-04-19T11:18:43Zurn:sha1:20d98c2cea3398ad93beccd4727a371f41514086
Signed-off-by: Asen Dimov <dimov@ronetix.at>
pm9261 converted to at91 soc access2010-04-30T10:23:22ZAsen Dimovdimov@ronetix.at2010-04-06T13:18:04Zurn:sha1:e3150c77617c7d452420e6c87769b79b6671b12d
Signed-off-by: Asen Dimov <dimov@ronetix.at>
ARM change name of defines for AT91 arm926ejs2010-03-07T18:36:35ZAchim Ehrlichaehrlich@taskit.de2010-02-24T09:29:16Zurn:sha1:7c966a8bdfdab80cafbfed035d7ae6ea6f58f756
Configuration defines should be preceeded with CONFIG_SYS_. Renamed
some at91 specific defines to conform to this naming convention:
AT91_CPU_NAME to CONFIG_SYS_AT91_CPU_NAME
AT91_MAIN_CLOCK to CONFIG_SYS_AT91_MAIN_CLOCK
Signed-off-by: Achim Ehrlich <aehrlich@taskit.de>
DM9000 init for pm92612009-09-05T00:58:42ZIlko Ilieviliev@ronetix.at2009-09-05T00:51:34Zurn:sha1:e830b66b3592f115316600d370399f3ee148e909
Signed-off-by: Ilko Iliev <iliev@ronetix.at>
at91: unify nor boot support2009-06-21T14:18:12ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-06-13T10:50:04Zurn:sha1:8096c51fd4e611ed666dbe77767e81af5d94fc7b
the lowlevel init sequence is the same so unify it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
at91: add support for the PM9261 board of Ronetix GmbH2009-06-21T14:18:11ZIlko Ilieviliev@ronetix.at2009-06-12T19:20:39Zurn:sha1:329492329700812c6df275aa0fda09d609cd0fd4
The PM9261 board is based on the AT91SAM9261-EK board.
Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9261.html
Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
pm9263: use macro instead of hardcode value for the lowlevel_init2009-06-21T14:18:11ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-06-12T19:20:38Zurn:sha1:01550a2b650fbabc03334f9eadcc6083601a2414
optimize a few the RAM init
Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
pm9263: lowlevel init update2009-06-21T14:18:11ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-06-12T19:20:37Zurn:sha1:7a11c7f9747240dc770954d320569596c0fbcb50
move PSRAM init to pm9263.c
this will allow us after to make the nor lowlevel_init generic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>