u-boot.git/board/sc3, branch v1.3.2Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/sc3?h=v1.3.22008-01-12T19:31:39ZFix linker scripts: add NOLOAD atribute to .bss/.sbss sections2008-01-12T19:31:39ZWolfgang Denkwd@denx.de2008-01-12T19:31:39Zurn:sha1:64134f011254123618798ff77c42ba196b2ec485
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.
The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.
Signed-off-by: Wolfgang Denk <wd@denx.de>
fix comments with new drivers organization2008-01-09T20:48:49ZMarcel Ziswilermarcel@ziswiler.com2007-12-30T02:30:46Zurn:sha1:7817cb2083d982923752fe0f12b67c0e7c09a027
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
ppc4xx: Rework of 4xx serial driver (2)2007-10-31T20:20:51ZStefan Roesesr@denx.de2007-10-22T13:44:39Zurn:sha1:882ae41274921f9016131806bdeb27e19606f47a
Change all linker scripts to reference the changed driver name 4xx_uart.o.
Note: In most cased all these explicit referencing of these object files
in the linker scripts is not neccessary. Only for manually embedded
environment into the U-Boot image, which is not done is most cases.
Signed-off-by: Stefan Roese <sr@denx.de>
board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS2007-07-09T23:48:11ZJon Loeligerjdl@freescale.com2007-07-09T23:45:16Zurn:sha1:ab3abcbabd840928fb1eb5122118ca466b5e5013
Signed-off-by: Jon Loeliger <jdl@freescale.com>
board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).2007-07-03T22:35:03ZJon Loeligerjdl@jdl.com2007-06-12T00:03:23Zurn:sha1:9107ebe0d352420895ab69b715697bdebc8caf50
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.
All transformations are of the form:
Before:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Make SC3 board build with 'make O='; use 'addcons' consistently2007-03-13T15:05:55ZWolfgang Denkwd@denx.de2007-03-13T15:05:55Zurn:sha1:a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
(SC3 and Jupiter used to use 'addcon' instead).
Signed-off-by: Wolfgang Denk wd@denx.de
[PATCH] Fix: Compilerwarnings for SC3 board.2007-01-18T10:28:51ZHeiko Schocherhs@pollux.denx.de2007-01-18T10:28:51Zurn:sha1:cb4820725e9fc409c5cbc8e83054a6ed522d2111
The EBC Configuration Register is now by CFG_EBC_CFG definable
Added JFFS2 support for the SC3 board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Raname solidcard3 into sc3; add redundant env for sc32007-01-16T17:30:50ZWolfgang Denkwd@pollux.denx.de2007-01-16T17:30:50Zurn:sha1:6d3e0107235aa0e6a6dcb77f9884497280bf85ad