u-boot.git/board/schneider, branch master Unnamed repository; edit this file 'description' to name the repository. Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" 2024-05-20T19:35:03+00:00 Tom Rini trini@konsulko.com 2024-05-20T19:35:03+00:00 03de305ec48b0bb28554372abb40ccd46dbe0bf9 As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
board: schneider: Remove <common.h> and add needed includes 2024-05-07T14:00:40+00:00 Tom Rini trini@konsulko.com 2024-05-01T02:42:41+00:00 8973eebf297b41794e1e9359b222815ed1f03a20 Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> 
Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
board: add support for Schneider HMIBSC board 2024-04-23T11:29:25+00:00 Sumit Garg sumit.garg@linaro.org 2024-04-12T09:54:38+00:00 969e3dd13e427dd2328e07b9e3131c2d74e436c1 Support for Schneider Electric HMIBSC. Features: - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) - 2GiB RAM - 64GiB eMMC, SD slot - WiFi and Bluetooth - 2x Host, 1x Device USB port - HDMI - Discrete TPM2 chip over SPI Features enabled in U-Boot: - RAUC updates - Environment protection - USB based ethernet adaptors Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> 
Support for Schneider Electric HMIBSC. Features:
- Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
- 2GiB RAM
- 64GiB eMMC, SD slot
- WiFi and Bluetooth
- 2x Host, 1x Device USB port
- HDMI
- Discrete TPM2 chip over SPI

Features enabled in U-Boot:
- RAUC updates
- Environment protection
- USB based ethernet adaptors

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
rzn1-snarc: Add missing MAINTAINERS file 2023-08-03T19:30:53+00:00 Tom Rini trini@konsulko.com 2023-07-25T22:31:55+00:00 e205fbcea0b4c94fad4ec04ebf8340fd11f80031 This should have been included when the platform was added, make one now. Signed-off-by: Tom Rini <trini@konsulko.com> 
This should have been included when the platform was added, make one
now.

Signed-off-by: Tom Rini <trini@konsulko.com>
tools: spkgimage: add Renesas SPKG format 2023-05-13T02:01:30+00:00 Ralph Siemsen ralph.siemsen@linaro.org 2023-05-13T01:36:57+00:00 afdfcb11f97cc6d96cb8cca10e35960b54466364 Renesas RZ/N1 devices contain BootROM code that loads a custom SPKG image from QSPI, NAND or USB DFU. Support this format in mkimage tool. SPKGs can optionally be signed, however creation of signed SPKG is not currently supported. Example of how to use it: tools/mkimage -n board/schneider/rzn1-snarc/spkgimage.cfg \ -T spkgimage -a 0x20040000 -e 0x20040000 \ -d u-boot.bin u-boot.bin.spkg The config file (spkgimage.cfg in this example) contains additional parameters such as NAND ECC settings. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> 
Renesas RZ/N1 devices contain BootROM code that loads a custom SPKG
image from QSPI, NAND or USB DFU. Support this format in mkimage tool.

SPKGs can optionally be signed, however creation of signed SPKG is not
currently supported.

Example of how to use it:

tools/mkimage -n board/schneider/rzn1-snarc/spkgimage.cfg \
	-T spkgimage -a 0x20040000 -e 0x20040000 \
	-d u-boot.bin u-boot.bin.spkg

The config file (spkgimage.cfg in this example) contains additional
parameters such as NAND ECC settings.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
board: schneider: add RZN1 board support 2023-05-13T02:01:30+00:00 Ralph Siemsen ralph.siemsen@linaro.org 2023-05-13T01:36:56+00:00 e87c869db3620c9b03b4364e144c19387d7bfd7a Add support for Schneider Electric RZ/N1D and RZ/N1S boards, which are based on the Reneasas RZ/N1 SoC devices. The intention is to support both boards using a single defconfig, and to handle the differences at runtime. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> 
Add support for Schneider Electric RZ/N1D and RZ/N1S boards, which
are based on the Reneasas RZ/N1 SoC devices.

The intention is to support both boards using a single defconfig, and to
handle the differences at runtime.

Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>