It is not functionally possible to use the code enabled by
PARTITION_TYPE_GUID without having EFI_PARTITION be enabled as well. Not
all users of the former had ensured that the latter was enabled however,
so audit all current users and then as appropriate select or imply
EFI_PARTITION as needed.

Signed-off-by: Tom Rini <trini@konsulko.com>

The symbol CONFIG_IP_DYN does not exist, but multiple contributors
copied an imply statement.

Remove the imply IP_DYN statements.

Fixes: 3fda0262c33f ("riscv: Add SiFive FU540 board support")
Fixes: 64413e1b7caf ("riscv: Add Microchip MPFS Icicle Kit support")
Fixes: 70415e1e528d ("board: sifive: add HiFive Unmatched board support")
Fixes: 6f902b85b6ee ("board: starfive: Add Kconfig for StarFive VisionFive v2 Board")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>

The fdtdfile variable contains quotes:

  printenv fdtfile
  fdtfile="sifive/hifive-unmatched-a00.dtb"

But this leads to issues which booting with an extlinux.conf format
file failing to find the .dtb file:

  Retrieving file: /usr/lib/linux-image-6.12.63+deb13-riscv64/"sifive/hifive-unmatched-a00.dtb"
  Skipping fdtdir /usr/lib/linux-image-6.12.63+deb13-riscv64/ for failure retrieving dts

Use the DEFAULT_FDT_FILE variable which has the quotes removed.

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>

This patch renames the board directory from board/freescale to
board/nxp because NXP now provides Board Support Packages (BSPs) and
tools for the former Freescale i.MX and other i.MX products.

All relevant references have been updated accordingly. This change does
not affect functionality.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

CONFIG_OF_BOARD isn't enabled on SiFive Unleashed and Unmatched, thus
board_fdt_blob_setup is actually dead code on these platforms. Let's
remove it.

Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

GPIO reset and power-off functionality depends on device tree data, which
is often absent in SPL or TPL. To address this, incorporate PHASE_ into the
config option and add Kconfig option or each phase.

Adjust SYSRESET_GPIO and POWEROFF_GPIO uses to address possible
regressions.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.

No yaks were harmed in this change, but there is a very small code-size
reduction.

For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass <sjg@chromium.org>

Fixes: 44a792c994 ("riscv: sifive: unmatched: migrate to text environment")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Rename spl_soc_init() to spl_dram_init() because the generic function
name does not reflect what the function actually does. Also
spl_dram_init() is commonly used for dram initialization and should be
called from board_init_f().

Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>