u-boot.git/board/socionext/developerbox/developerbox.c, branch v2022.04

Revert "board: synquacer: developerbox: Don't set gd->env_addr to default_environment"

2021-11-18T19:22:11+00:00

Without default setting of gd->env_addr, U-Boot will cause
a synchronous abort if the env-variables on the SPI flash is
broken or not saved corectly. Set gd->env_addr correctly.

This reverts commit 535870f3b0fb09ee9b2885409f05304111464643.

Signed-off-by: Masami Hiramatsu 
Reviewed-by: Marek Behún

board: synquacer: developerbox: Don't set gd->env_addr to default_environment

2021-10-31T18:26:44+00:00

This board sets gd->env_addr to default_environment in board_init(), but
the board has environment in SPI flash according to defconfig. Let the
env API handle environment automatically.

Signed-off-by: Marek Behún 
Cc: Masami Hiramatsu 
Reviewed-by: Simon Glass

board: synquacer: Initialize SCBM SMMU at board_init()

2021-07-23T22:53:45+00:00

Since the SCBM SMMU is not only connected to the NETSEC
but also shared with the F_SDH30 (eMMC controller), that
should be initialized at board level instead of NETSEC.

Move the SMMU initialization code into board support
and call it from board_init().

Without this fix, if the NETSEC is disabled, the Linux
eMMC ADMA cause an error because SMMU is not initialized.

Signed-off-by: Masami Hiramatsu

board: synquacer: Add DeveloperBox 96boards EE support

2021-07-06T18:11:50+00:00

Add the DeveloperBox 96boards EE support. This board is also
known as Socionext SynQuacer E-Series. It contians one "SC2A11"
SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots,
3 PCIe slots (1 4x port and 2 1x ports which are expanded via
PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA
ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard
MicroATX Form Factor.

For more information, see this page;
  https://www.96boards.org/product/developerbox/

Signed-off-by: Masami Hiramatsu