u-boot.git/board/solidrun/clearfog, branch master

board: solidrun: clearfog: enable ddr odt0 on write for both chip-select

2025-01-28T08:08:44+00:00

Enabling ODT is required to suppress reflection of the data signal on
DDR write operation. SolidRun Armada 388 SoM only connects M_ODT[0] even
when both chip-select are used.

Enable ODT[0] for both chip-select during write only.

Original work by Baruch Siach [1] and Chris Packham [2].

[1] https://github.com/SolidRun/u-boot-armada38x/commit/aba763a611e69fbcc4e229659da9d84f16b39814
[2] https://github.com/SolidRun/u-boot-armada38x/commit/dbaf09590df9add19e738d2de03c0f2d0d8f5433

Signed-off-by: Josua Mayer 
Reviewed-by: Stefan Roese

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

board: solidrun: Remove and add needed includes

2024-05-07T14:00:40+00:00

Remove  from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini

board: solidrun: clearfog: fix serdes 1 / eth2 speed for clearfog gtr

2024-01-22T11:47:45+00:00

Clearfog GTR connects eth2 / serdes 1 to a 2.5Gbps capable ethernet
switch port. Linux already configures a fixed-link at speed 2500 from
device-tree.

Upgrade serdes 1 rate to 3.125Gbps to support a 2.5Gbps link.

Additionally add comments documenting each serdes' function of clearfog
gtr, which are shared with clearfog pro.

Signed-off-by: Josua Mayer

arm: mvebu: clearfog gtr: add config option to select serdes0 interface

2024-01-22T11:47:45+00:00

Clearfog GTR has an assembly option for a SATA connector, CON18.
It shares the serdes with mini-pcie connector CON3.

Add new kconfig option to select betweenata and pci, defaulting to pci
as it was previously configured in board-file.

Clearfog GTR connects eth2 / serdes 1 to a 2.5Gbps capable ethernet
switch port. Linux already configures a fixed-link at speed 2500 from
device-tree.
Upgrade serdes 1 rate to 3.125Gbps to support a 2.5Gbps network link on
Clearfog GTR.

Signed-off-by: Josua Mayer

arm: mvebu: clearfog: support 512MB memory size from tlv eeprom

2023-10-16T12:00:45+00:00

Handle 2GBit memory size value "2" from tlv eeprom on ddr
initialisation, to support SoMs with 512MB ddr memory.

Signed-off-by: Josua Mayer 
Reviewed-by: Stefan Roese

arm: mvebu: clearfog: read number of ddr channels from tlv data

2023-10-16T12:00:45+00:00

Extend the existing tlv vendor extension used for ram size by one byte to
also store the number of ddr channels.
The length of the tlv entry can indicate whether the new information is
present. If not default to single channel.

Signed-off-by: Josua Mayer 
Reviewed-by: Stefan Roese

MAINTAINERS: Fix path typos and similar

2023-07-25T16:44:47+00:00

We have a number of cases where the in-tree path of files and where
they presumably were when the first version of a patch were posted
differ slightly.  Correct these to point at where the files are now.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

MAINTAINERS: Add some missing defconfig files to existing entries

2023-07-25T16:44:47+00:00

We have a few places where defconfigs were added (or renamed) and not
included in their previously listed MAINTAINERS entry, correct this.

Signed-off-by: Tom Rini 
Acked-by:  Adam Ford 
Reviewed-by: Simon Glass