u-boot.git/board/solidrun, branch v2016.01

MAINTAINERS/mailmap: Update my email address

2016-01-11T16:22:43+00:00

Update my email address to the NXP account.

Signed-off-by: Fabio Estevam

mx6cuboxi: Remove obsolete comment

2016-01-10T09:50:53+00:00

We currently support various versions of Solidrun mx6 boards, so
remove the obsolete comment.

Reported-by: Jon Nettleton 
Signed-off-by: Fabio Estevam 
Reviewed-by: Stefano Babic

mx6cuboxi: Fix the reset delay for the AR8035 PHY

2016-01-10T09:50:24+00:00

Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is
registered") Ethernet is no longer functional:

Booting from net ...
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4

This commit does not have an issue in itself, but it revelead a problem
with the Ethernet initialization.

As per the AR8035 datasheet:

"For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset
1ms requirement is satisfied."

So do as suggested and keep the reset low for 10ms.

Also add a 100us delay after deasserting the reset line
to guarantee that the PHY ID can be read correctly and the Atheros
PHY can be loaded as per Troy Kisky's suggestion.

Signed-off-by: Fabio Estevam 
Tested-by: Tom Rini

mx6: remove SYS_SOC from board Kconfig

2015-09-13T08:37:29+00:00

Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.

Signed-off-by: Peng Fan 
Cc: Stefano Babic 
Cc: Heiko Schocher 
Cc: Christian Gmeiner 
Cc: Stefan Roese 
Cc: Troy Kisky 
Cc: Nikita Kiryanov 
Cc: "Eric Bénard" 
Cc: Fabio Estevam 
Cc: Tim Harvey 
Cc: Marek Vasut 
Cc: Markus Niebel 
Cc: Otavio Salvador 
Acked-by: Stefan Roese 
Acked-by: Marek Vasut 
Acked-by: Christian Gmeiner 
Acked-by: Markus Niebel 
Acked-by: Troy Kisky 
Acked-by: Igor Grinberg

imx: mx6: ddr init MMDC according to ddr_type

2015-09-02T13:34:12+00:00

To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg
to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper.
The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg
when ddr_type is for DDR3. Later we can use ddr_type to initialize
MMDC for LPDDR2.

Initialize ddr_type for different boards which enable SPL.

Signed-off-by: Peng Fan 
Cc: Stefano Babic 
Cc: Tim Harvey 
Cc: Stefan Roese 
Cc: Fabio Estevam 
Reviewed-by: Stefan Roese

imx: clock support enet2 anatop clock support

2015-09-02T13:29:14+00:00

To i.MX6SX/UL, two ethernet interfaces are supported.
Add ENET2 clock support:
1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed.
   To value 1, only i.MX6SX/UL can pass the check.
2. Modify board code who use this api to follow new api prototype.

Signed-off-by: Peng Fan 
Cc: Heiko Schocher 
Cc: Fabio Estevam 
Cc: Stefan Roese 
Cc: Nikolaos Pasaloukos 
Cc: Stefano Babic 
Reviewed-by: Stefan Roese

mx6cuboxi: Fix boot of hummingboard dual-lite

2015-06-15T10:12:59+00:00

Hummingboard dual-lite is picking the incorrect calibration structure.

Fix it so that it can boot.

While at it, also fix p1_mpdgctrl1 register to match Solid-run's
setting.

Reported-by: Andrei Gherzan 
Signed-off-by: Fabio Estevam 
Tested-by: Andrei Gherzan

hummingboard: Remove unused directory

2015-05-19T13:08:22+00:00

The 'mx6-microsom' directory was only used for the previous mx6solo
hummingboard support, which has been removed in favour of the SPL
version.

Remove the remaining piece of the old mx6solo hummingboard support.

Signed-off-by: Fabio Estevam 
Acked-by: Stefano Babic

mx6cuboxi: Mention Cubox-i in the README

2015-05-15T17:21:23+00:00

Cubox-i boards are also supported, so update the README file.

Signed-off-by: Fabio Estevam

hummingboard: Remove mx6solo specific support

2015-05-15T17:21:23+00:00

Hummingboard dual, dual-lite and solo are now supported via SPL mechanism.

Remove the previous hummingboard support, which does not use SPL and supported
only the solo variant.

Signed-off-by: Fabio Estevam 
Reviewed-by: Tom Rini