u-boot.git/board/solidrun, branch v2016.03-rc1

arm: mvebu: Consolidate board Kconfig options into one file

2016-01-14T13:08:59Z

Merging all the board specific Kconfig options into the main Kconfig file for mach-mvebu makes things easier to maintain. Signed-off-by: Stefan Roese Cc: Luka Perkov

arm: mvebu: Add SolidRun ClearFog Armada 38x initial support

2016-01-14T13:08:59Z

This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese Cc: Rabeeh Khoury Cc: Luka Perkov

MAINTAINERS/mailmap: Update my email address

2016-01-11T16:22:43Z

Update my email address to the NXP account. Signed-off-by: Fabio Estevam

mx6cuboxi: Remove obsolete comment

2016-01-10T09:50:53Z

We currently support various versions of Solidrun mx6 boards, so remove the obsolete comment. Reported-by: Jon Nettleton Signed-off-by: Fabio Estevam Reviewed-by: Stefano Babic

mx6cuboxi: Fix the reset delay for the AR8035 PHY

2016-01-10T09:50:24Z

Since commit 59370f3fcd1350 ("net: phy: delay only if reset handler is registered") Ethernet is no longer functional: Booting from net ... FEC Waiting for PHY auto negotiation to complete......... TIMEOUT ! BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 This commit does not have an issue in itself, but it revelead a problem with the Ethernet initialization. As per the AR8035 datasheet: "For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." So do as suggested and keep the reset low for 10ms. Also add a 100us delay after deasserting the reset line to guarantee that the PHY ID can be read correctly and the Atheros PHY can be loaded as per Troy Kisky's suggestion. Signed-off-by: Fabio Estevam Tested-by: Tom Rini

mx6: remove SYS_SOC from board Kconfig

2015-09-13T08:37:29Z

Remove duplicated SYS_SOC Kconfig entry from board Kconfig, because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Heiko Schocher Cc: Christian Gmeiner Cc: Stefan Roese Cc: Troy Kisky Cc: Nikita Kiryanov Cc: "Eric Bénard" Cc: Fabio Estevam Cc: Tim Harvey Cc: Marek Vasut Cc: Markus Niebel Cc: Otavio Salvador Acked-by: Stefan Roese Acked-by: Marek Vasut Acked-by: Christian Gmeiner Acked-by: Markus Niebel Acked-by: Troy Kisky Acked-by: Igor Grinberg

imx: mx6: ddr init MMDC according to ddr_type

2015-09-02T13:34:12Z

To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg when ddr_type is for DDR3. Later we can use ddr_type to initialize MMDC for LPDDR2. Initialize ddr_type for different boards which enable SPL. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Tim Harvey Cc: Stefan Roese Cc: Fabio Estevam Reviewed-by: Stefan Roese

imx: clock support enet2 anatop clock support

2015-09-02T13:29:14Z

To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan Cc: Heiko Schocher Cc: Fabio Estevam Cc: Stefan Roese Cc: Nikolaos Pasaloukos Cc: Stefano Babic Reviewed-by: Stefan Roese

mx6cuboxi: Fix boot of hummingboard dual-lite

2015-06-15T10:12:59Z

Hummingboard dual-lite is picking the incorrect calibration structure. Fix it so that it can boot. While at it, also fix p1_mpdgctrl1 register to match Solid-run's setting. Reported-by: Andrei Gherzan Signed-off-by: Fabio Estevam Tested-by: Andrei Gherzan

hummingboard: Remove unused directory

2015-05-19T13:08:22Z

The 'mx6-microsom' directory was only used for the previous mx6solo hummingboard support, which has been removed in favour of the SPL version. Remove the remaining piece of the old mx6solo hummingboard support. Signed-off-by: Fabio Estevam Acked-by: Stefano Babic