u-boot.git/board/solidrun, branch v2018.05

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

mx6cuboxi: Fix some memory configuration errors

2018-04-15T09:56:21+00:00

These changes bring mainline back into line with the configurations
that were originally set in our stable BSP.

Signed-off-by: Jon Nettleton 
Signed-off-by: Fabio Estevam

arm: mvebu: ClearFog: document boot selection switches, update UART

2018-01-09T15:41:00+00:00

Signed-off-by: Florian Klink 
Signed-off-by: Stefan Roese

arm: mvebu: correct comments around cas_wl/cas_l

2017-11-30T07:30:59+00:00

The order of members in struct hws_topology_map is cas_wl, cas_l. The
comments in the original db-88f6820-gp.c had this wrong and have been
copied to other Armada-385 based boards. Practically this hasn't made a
difference since all these boards set both cas_wl and cas_l to 0
(autodetect) but if there were ever a board that did need to set these
explicitly they would run into unexpected issued.

Update the comments to reflect the correct order of structure members.

Reported-by: Tobi Wulff 
Signed-off-by: Chris Packham 
Reviewed-by: Stefan Roese 
Signed-off-by: Stefan Roese

mx6cuboxi: Avoid calling setup_display() from SPL code

2017-10-12T15:30:32+00:00

There is no need call setup_display() from SPL code, so move it to
board_init(), which executes only in U-Boot proper.

Reported-by: Stefano Babic 
Signed-off-by: Fabio Estevam 
Reviewed-by: Stefano Babic

arm: mvebu: clearfog: document boot from UART

2017-09-26T04:53:26+00:00

Signed-off-by: Baruch Siach 
Signed-off-by: Stefan Roese

detect and setup solidrun hummingboard2

2017-09-20T13:34:59+00:00

The hummingboard2 is slightly different to the cubox i and to the
hummingboard. The GPIO pin info to probe came from solidruns
for of u-boot on github.
https://github.com/SolidRun/u-boot-imx6/blob/imx6/board/solidrun/mx6_cubox-i/mx6_cubox-i.c#L569-L589
I have tested on a hummingboard-edge witha  imx6 solo and 512mb of
ram.

Signed-off-by: Dennis Gilmore

imx: imx6: Move gpr_init() function to soc.c

2017-08-28T07:48:53+00:00

Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
MX6Q and MX6QP processors move it to the soc.c file.

Signed-off-by: Breno Lima 
Acked-by: Stefano Babic 
Reviewed-by: Lukasz Majewski 
Reviewed-by: Fabio Estevam

env: Rename setenv() to env_set()

2017-08-16T12:22:18+00:00

We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2017-07-18T12:42:48+00:00