u-boot.git/board/solidrun, branch v2018.05-rc2

mx6cuboxi: Fix some memory configuration errors

2018-04-15T09:56:21Z

These changes bring mainline back into line with the configurations that were originally set in our stable BSP. Signed-off-by: Jon Nettleton Signed-off-by: Fabio Estevam

arm: mvebu: ClearFog: document boot selection switches, update UART

2018-01-09T15:41:00Z

Signed-off-by: Florian Klink Signed-off-by: Stefan Roese

arm: mvebu: correct comments around cas_wl/cas_l

2017-11-30T07:30:59Z

The order of members in struct hws_topology_map is cas_wl, cas_l. The comments in the original db-88f6820-gp.c had this wrong and have been copied to other Armada-385 based boards. Practically this hasn't made a difference since all these boards set both cas_wl and cas_l to 0 (autodetect) but if there were ever a board that did need to set these explicitly they would run into unexpected issued. Update the comments to reflect the correct order of structure members. Reported-by: Tobi Wulff Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese

mx6cuboxi: Avoid calling setup_display() from SPL code

2017-10-12T15:30:32Z

There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic Signed-off-by: Fabio Estevam Reviewed-by: Stefano Babic

arm: mvebu: clearfog: document boot from UART

2017-09-26T04:53:26Z

Signed-off-by: Baruch Siach Signed-off-by: Stefan Roese

detect and setup solidrun hummingboard2

2017-09-20T13:34:59Z

The hummingboard2 is slightly different to the cubox i and to the hummingboard. The GPIO pin info to probe came from solidruns for of u-boot on github. https://github.com/SolidRun/u-boot-imx6/blob/imx6/board/solidrun/mx6_cubox-i/mx6_cubox-i.c#L569-L589 I have tested on a hummingboard-edge witha imx6 solo and 512mb of ram. Signed-off-by: Dennis Gilmore

imx: imx6: Move gpr_init() function to soc.c

2017-08-28T07:48:53Z

Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima Acked-by: Stefano Babic Reviewed-by: Lukasz Majewski Reviewed-by: Fabio Estevam

env: Rename setenv() to env_set()

2017-08-16T12:22:18Z

We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2017-07-18T12:42:48Z

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44Z

Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic CC: Fabio Estevam CC: Akshay Bhat CC: Ken Lin CC: Marek Vasut CC: Heiko Schocher CC: "Sébastien Szymanski" CC: Christian Gmeiner CC: Stefan Roese CC: Patrick Bruenn CC: Troy Kisky CC: Nikita Kiryanov CC: Otavio Salvador CC: "Eric Bénard" CC: Jagan Teki CC: Ye Li CC: Peng Fan CC: Adrian Alonso CC: Alison Wang CC: Tim Harvey CC: Martin Donnelly CC: Marcin Niestroj CC: Lukasz Majewski CC: Adam Ford CC: "Albert ARIBAUD (3ADEV)" CC: Boris Brezillon CC: Soeren Moch CC: Richard Hu CC: Wig Cheng CC: Vanessa Maegima CC: Max Krummenacher CC: Stefan Agner CC: Markus Niebel CC: Breno Lima CC: Francesco Montefoschi CC: Jaehoon Chung CC: Scott Wood CC: Joe Hershberger CC: Anatolij Gustschin CC: Simon Glass CC: "Andrew F. Davis" CC: "Łukasz Majewski" CC: Patrice Chotard CC: Nobuhiro Iwamatsu CC: Hans de Goede CC: Masahiro Yamada CC: Stephen Warren CC: Andre Przywara CC: "Álvaro Fernández Rojas" CC: York Sun CC: Xiaoliang Yang CC: Chen-Yu Tsai CC: George McCollister CC: Sven Ebenfeld CC: Filip Brozovic CC: Petr Kulhavy CC: Eric Nelson CC: Bai Ping CC: Anson Huang CC: Sanchayan Maity CC: Lokesh Vutla CC: Patrick Delaunay CC: Gary Bisson CC: Alexander Graf CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam Reviewed-by: Christian Gmeiner