u-boot.git/board/solidrun, branch v2020.07-rc2

arm: mvebu: clearfog: Use Pro DT by default

2020-04-14T11:16:42Z

Switch to explicitly using the Pro variant DT, which has been available since Linux 4.11. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

arm: mvebu: clearfog: move ENV params to Kconfig

2020-04-14T11:16:42Z

Migrate the values for ENV_SIZE and ENV_OFFSET into board specific Kconfig defaults so they're more accessible for configuration. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

arm: mvebu: clearfog: add SPI offsets

2020-04-14T11:16:42Z

Add reasonable default SPI offsets and ENV size when configured to boot from SPI flash. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

arm: mvebu: clearfog: Unify DT selection paths

2020-04-14T11:16:42Z

Unify the location of DT selection into board_late_init instead of split between detection and static configuration paths. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

arm: mvebu: clearfog: Add SATA mode flags

2020-04-14T11:16:42Z

The mPCIe slots on ClearFog Pro and ClearFog Base may be alternately configured for SATA usage. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

arm: mvebu: clearfog: Add option for 2.5 Gbps SFP

2020-04-14T11:16:42Z

While newer Linux kernels provide autoconfiguration of SFP, provide an option for setting in U-Boot Kconfig for use prior to booting. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

arm: mvebu: clearfog: initial ClearFog Base variant

2020-04-14T11:16:42Z

Add a unique entry for ClearFog Base variant, reflected in the board name and adjusted SerDes topology. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

arm: mvebu: clearfog: use Pro name by default

2020-04-14T11:16:42Z

Make the board version printed indicate the Pro variant default. Also adjust static name casing to match what is expected for EEPROM product name to share string constants. Signed-off-by: Joel Johnson Reviewed-by: Stefan Roese

ARM: mvebu: clearfog: add Clearfog Base serdes configuration

2020-01-21T14:56:15Z

Clearfog Base carrier uses serdes lane #5 as USB host. Use EEPROM stored device identification to configure the serdes accordingly when available. Reviewed-by: Stefan Roese Signed-off-by: Baruch Siach

ARM: mvebu: clearfog: add Clearfog GTR support

2020-01-21T14:56:15Z

Select the serdes configuration table based on the platform identity read from EEPROM TLV data. Clearfog GTR needs a slightly different serdes configuration. Reviewed-by: Stefan Roese Signed-off-by: Baruch Siach