u-boot.git/board/spear, branch v2016.09

arm: spear: x600: Add support for Micrel KSZ9031 PHY

2016-05-31T05:48:34Z

As the old ethernet PHY is not available any more, the x600 board has been redesigned with the Micrel KSZ9031 PHY. This patch adds support to autodetect the PHY and configure the Micrel PHY correctly. Signed-off-by: Stefan Roese

net: designware: Zap CONFIG_DW_AUTONEG

2015-12-22T03:42:27Z

This symbol is not used anywhere, so remove it. For spear600, remove it from the board file, since the symbol is not defined for spear600 either. Signed-off-by: Marek Vasut Cc: Dinh Nguyen Cc: Joe Hershberger

arm: spear: Fix booting - relocate vector table to 0 (low-vector)

2015-08-28T16:33:16Z

Booting SPEAr600 eval board doesn't work with current mainline U-Boot. With this patch the low-vector bit is left to '0'. Resulting in the common relocation of the vectors to 0 (SDRAM) to work correctly. Tested on the SPEAr600 EVB. Signed-off-by: Stefan Roese Acked-by: Viresh Kumar Cc: Vipin Kumar

Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig

2015-04-18T17:11:36Z

Move this to Kconfig and clean up board config files that use it. Also rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists in drivers/net/Kconfig. Signed-off-by: Simon Glass Version 1: Acked-by: Joe Hershberger

kconfig: arm: introduce symbol for ARM CPUs

2014-10-29T13:02:09Z

This commit introduces a Kconfig symbol for each ARM CPU: CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136, CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100. Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected for CPU_ARM1176 and CPU_V7. For each target, the corresponding CPU is selected and the definition of SYS_CPU in the corresponding Kconfig file is removed. Also, it removes redundant "string" type in some Kconfig files. Signed-off-by: Georges Savoundararadj Acked-by: Albert ARIBAUD Cc: Masahiro Yamada

MAINTAINERS: comment out blank M: field

2014-09-24T22:30:28Z

Since commit ddaf5c8f3030050fcd356a1e49e3ee8f8f52c6d4 (patman: RunPipe() should not pipe stdout/stderr unless asked), Patman spits lots of "Invalid MAINTAINERS address: '-'" error messages for patches with global changes. It takes too long for Patman to process them. Anyway, "M: -" does not carry any important information. Rather, it is just like a place holder in case of assigning a new board maintainer. Let's comment out. This commit can be reproduced by the following command: find . -name MAINTAINERS | xargs sed -i -e '/^M:[[:blank:]]*-$/s/^/#/' Signed-off-by: Masahiro Yamada

kconfig: remove redundant "string" type in arch and board Kconfigs

2014-09-13T20:43:55Z

Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_$ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME$/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada

Add board MAINTAINERS files

2014-07-30T12:48:06Z

We have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it. The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script. After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place. TODO: Modify get_maintainer.pl to scan multiple MAINTAINERS files. Signed-off-by: Masahiro Yamada Suggested-by: Tom Rini Acked-by: Simon Glass

kconfig: add board Kconfig and defconfig files

2014-07-30T12:48:01Z

This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada Acked-by: Simon Glass

fpga: xilinx: Avoid CamelCase for in Xilinx_desc

2014-05-13T07:12:53Z

No functional changes. Signed-off-by: Michal Simek