u-boot.git/board/st/common, branch v2022.01

tee: add a stub for tee_find_device

2021-10-05T12:44:48Z

Add stub for tee_find_device function when CONFIG_TEE is not activated to simplify the caller code. This patch allows to remove the CONFIG_IS_ENABLED(OPTEE) tests for stm32 platform. Signed-off-by: Patrick Delaunay Acked-by: Etienne Carriere Reviewed-by: Jens Wiklander

arm: stm32mp: add defconfig for trusted boot with FIP

2021-08-16T07:36:31Z

Add TF-A FIP support for trusted boot on STM32MP15x, when STM32MP15x_STM32IMAGE is not activated. With FIP support the SSBL partition is named "fip" and its size is 4MB, so the ENV partition name in device tree (for SD card or eMMC) or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND) need to be modified. With FIP the TEE MTD partitions are removed because the OP-TEE binray are included in the FIP containers. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

stm32mp: stm32prog: Add CONFIG_CMD_STM32PROG_SERIAL and _USB

2021-03-11T16:41:17Z

Add CONFIG_CMD_STM32PROG_SERIAL and CONFIG_CMD_STM32PROG_USB to independently select the support of UART or USB communication for STM32CubeProgrammer. For serial boot over UART, user can deactivate CONFIG_CMD_STM32PROG_SERIAL to use U-Boot console of binary loaded by UART (for board bring-up for example). Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

board: st: remove the nand MTD configuration for NOR boot in stm32mp1 board

2021-03-11T16:40:28Z

Since commit d5d726d3cc47 ("configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp"), the stm32mp1 boards only support SD card after NOR boot device, so the MTD partitions for nand0 or spi-nand0 are useless (no need of "UBI" partition in nand0 or spi-nand0). This patch removes these nand MTD update for nor boot and simplify nand0 and spi-nand0 support (remove the mtd_boot variable). Signed-off-by: Patrick Delaunay Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

Correct U-Boot upstream repository

2021-02-28T18:57:30Z

The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42Z

Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include at all, so remove that include. Signed-off-by: Simon Glass Signed-off-by: Tom Rini

MAINTAINERS: Update STi and STM32 maintainers emails in remaining files

2021-01-13T08:52:58Z

A previous series already update STMicroelectronics emails maintainers but some files have been omitted (Makefile, .dts, .dtsi and .rst files). Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard Reviewed-by: Patrick Delaunay

board: st: common: migrate trace to dev and log macro

2021-01-13T08:52:58Z

Change pr_* to dev_ or log_ macro and define LOG_CATEGORY. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()

2021-01-05T19:26:35Z

In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass

board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf

2020-08-13T07:52:49Z

Use CONFIG_IS_ENABLED to prevent ifdef in set_dfu_alt_inf. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard