Factorize FWU multi-bank support code common to STM32MP1 and
STM32MP2 platforms into a dedicated shared source file.

No functional change intended.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Following commit 4300f9f4c5d7 ("board: st: stm32mp25: support dynamic
A/B bank bootup"), this patch enables automatic detection of the active
A/B bank on STM32MP15 platforms by retrieving partition GUIDs from FWU
metadata.

This ensures the system correctly identifies the bootable partitions
even in multi-bank scenarios, falling back to a standard bootable flag
scan if the UUIDs are missing.

To enable A/B bank bootup on STM32MP15 boards, add the following Kconfig
options to the  stm32mp15[_basic]_defconfig:

 CONFIG_FWU_MULTI_BANK_UPDATE=y
 CONFIG_FWU_MDATA=y
 CONFIG_FWU_NUM_BANKS=2
 CONFIG_FWU_NUM_IMAGES_PER_BANK=3
 CONFIG_CMD_FWU_METADATA=y
 CONFIG_FWU_MDATA_V2=y

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Enable automatic detection of the active A/B bank by retrieving
partition GUIDs from FWU metadata.

This ensures the system correctly identifies the bootable partitions
even in multi-bank scenarios, falling back to a standard bootable flag
scan if the UUIDs are missing.

To enable A/B bank bootup on stm32mp25 boards, add the following Kconfig
options to the stm32mp25_defconfig:

 CONFIG_FWU_MULTI_BANK_UPDATE=y
 CONFIG_FWU_MDATA=y
 CONFIG_FWU_NUM_BANKS=2
 CONFIG_FWU_NUM_IMAGES_PER_BANK=3
 CONFIG_CMD_FWU_METADATA=y
 CONFIG_FWU_MDATA_V2=y

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

All of these platforms enable CONFIG_BOARD_EARLY_INIT_F and then have a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Depending of plugged power source (computer, wall charger, ...) it can
happen that we got the following message:

"****************************************************"
"*      USB TYPE-C charger not compliant with       *"
"*                   specification                  *"
"****************************************************"
"                                                    "
"### ERROR ### Please RESET the board ###            "

This issue has been detected on STM32MP135f-DK board.

It's due to max_uV and min_uV value are initialized at beginning of
board_check_usb_power() and can then be used for the 2 iteration of
adc_measurement().
max_uV/min_uV values issued of the first adc_measurement() iteration
are used as input of the second adc_measurement() iteration, which
can lead to incoherent pair of min_uV/max_uV values.

To ensure that adc_measurement() returns coherent value for max_uV and
min_uV, initialize max_uV and min_uV at each loop start.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>

Prepare v2026.04-rc4

STM32MP21 application processors (STM32 MPUs) based on a single
Arm Cortex®-A35 core running up to 1.5 GHz and Cortex®-M33 core
running at 300 MHz.

It is pin-compatible with the STM32MP2 series in the VFBGA361
10×10 mm package: the STM32MP21 uses a subset of the STM32MP23
pinout, which itself is a subset of the STM32MP25.

More details available here :
https://www.st.com/en/microcontrollers-microprocessors/stm32mp2-series.html

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

class_get_device_by_driver()'s return value is not checked, in case of BSEC
driver is not probed, dev is not set and used just after as parameter of
misc_read() which leads to a Synchronous Abort.

Add uclass_get_device_by_driver()'s return value check to fix it.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

Add board identifier for STM32MP21 discovery board = MB2059.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.

Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>