u-boot.git/board/st, branch v2020.01

common: Move some board functions out of common.h

2019-12-02T23:25:21Z

A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move some cache and MMU functions out of common.h

2019-12-02T23:23:55Z

These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Move serial functions out of common.h

2019-12-02T23:23:11Z

These functions belong in serial.h so move them over. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

common: Drop global inclusion of status_led.h

2019-12-02T23:23:06Z

This is only used by a few files so it should not be in the common header. Move it out. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

stm32mp1: add support for virtual partition read

2019-11-26T09:14:35Z

Add read for OTP and PMIC NVM with alternates on virtual DFU device. Serie-cc: Boris Brezillon Signed-off-by: Patrick Delaunay

stm32mp1: board: add spi nand support

2019-11-26T09:14:35Z

This patch adds the support of the spi nand device in mtdparts command and in dfu_alt_info. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

stm32mp1: activate SET_DFU_ALT_INFO

2019-11-26T09:14:34Z

Generate automatically dfu_alt_info for the supported device. The simple command "dfu 0" allows to start the dfu stack on usb 0 for the supported devices: - dfu mtd for nand0 - dfu mtd for nor0 - dfu mmc for SDCard - dfu mmc for eMMC - dfu ram for images in DDR The DUF alternate use the "part", "partubi" and "mmcpart" options to select the correct MTD or GPT partition or the eMMC hw boot partition. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

board: stm32mp1: fixup the usb product id for USB download gadget

2019-10-22T09:00:07Z

Select the correct USB product id used by the download gadget for ST stm32mp1 boards. The board stm32mp1 select the correct product id, as defined in http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM): - dfu = 0xdf11 : STM Device in DFU mode it is the value used by ROM code and reused for stm32prog command - fasboot = 0x0afb : Android Fastboot device - others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device it is used for UMS command / usb_dnl_ums This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID). Signed-off-by: Patrick Delaunay Acked-by: Patrice Chotard

board: Add STM32F769 SoC, discovery board support

2019-10-13T21:38:47Z

Signed-off-by: Yannick Fertré

net: dwc_et_qos: update weak function board_interface_eth_init

2019-09-04T16:37:19Z

Align the board and driver prototype for board_interface_eth_init to avoid execution issue (the interface_type parameter is defined as int or phy_interface_t). To have a generic weak function (it should be reused by other driver) I change the prototype to use directly udevice. This prototype is added in netdev.h to allow compilation check and avoid warning when compiling with W=1 on file board/st/stm32mp1/stm32mp1.c warning: no previous prototype for 'board_interface_eth_init'\ [-Wmissing-prototypes] int board_interface_eth_init(int interface_type, .... ^~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Patrice Chotard Signed-off-by: Patrick Delaunay Acked-by: Joe Hershberger