u-boot.git/board/starfive/visionfive2, branch v2024.04

board: starfive: maintainer: Add visionfive2 PCIe driver

2024-03-12T06:36:13Z

Add PCIe driver file to visionfive2 board MAINTAINERS list. Signed-off-by: Minda Chen Reviewed-by: Leo Yu-Chi Liang

board: starfive: Update maintainer of VisionFive v2 board

2024-03-12T06:36:13Z

Update the maintainer of Starfive VisionFive v2 board. Signed-off-by: Minda Chen Reviewed-by: Leo Yu-Chi Liang

board: visionfive2: configure PHY pad drive strength

2024-01-31T08:52:49Z

Configure the pad drive strength register for both PHYs. The values correspond to what can be found in the Linux DTS for VisionFive2 v1.3b. Pad drive strength configuration is required for the phy0 to work correctly with 100Mbit links. Signed-off-by: Lukasz Tekieli Reviewed-by: Leo Yu-Chi Liang

board: starfive: handle compatible property in dynamic DT configuration

2024-01-31T08:52:07Z

The difference between the StarFive VisionFive 2 1.2A and 1.3B boards is handled dynamically by looking at the PCB version in the EEPROM in order to have a single u-boot version for both versions of the board. While the "model" property is correctly handled, the "compatible" one is always the the one of version 1.3b. This patch add support for dynamically configuring that property. Fixes: 9b7060bd15e7 ("riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B") Signed-off-by: Aurelien Jarno Reviewed-by: Leo Yu-Chi Liang

board: starfive: spl: Support jtag for VisionFive2 board

2023-11-02T07:44:56Z

JTAG pins are mapped as below. To access the JTAG pins, we need to control the GPIO pins from SPL which seems to be the earliest stage for JTAG. - JTAG nTRST: GPIO36 / Input - JTAG TDI: GPIO61 / Input - JTAG TMS: GPIO63 / Input - JTAG TCK: GPIO60 / Input - JTAG TDO: GPIO44 / Output Signed-off-by: Chanho Park Reviewed-by: Leo Yu-Chi Liang

cmd: Convert existing long help messages to the new macro

2023-10-16T14:24:58Z

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines and use U_BOOT_LONGHELP to declare the same variable name as before - In a few places, either rename the variable to follow convention or introduce the variable as it was being done inline before. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

eeprom: starfive: add 'mac raw' command

2023-10-16T14:22:11Z

Add a sub-command to print a hexdump of the EEPROM content. Signed-off-by: Heinrich Schuchardt

eeprom: starfive: raw dump if unsupported data version

2023-10-16T14:22:11Z

If the data version field of the EEPROM is not supported, provide a hexdump of the data. Signed-off-by: Heinrich Schuchardt

eeprom: starfive: re-implement mac command

2023-10-16T14:22:11Z

The different implementations of the mac command have board or vendor specific sub-commands. Add the command definition specific to the VisionFive 2 board. Don't call cmd_usage() directly but return CMD_RET_USAGE instead. Signed-off-by: Heinrich Schuchardt

Merge branch 'next'

2023-10-02T14:55:44Z

Signed-off-by: Tom Rini