u-boot.git/board/starfive/visionfive2, branch v2026.01

board: starfive: visionfive2: Add Milk-V Mars CM and Mars CM Lite selection by product_id

2025-10-28T11:30:56Z

Add identifier for Milk-V Mars CM to dts selection callback in SPL, and to fdtfile environment variable default value selection in payload. Signed-off-by: E Shattow Reviewed-by: Hal Feng

spl: split spl_board_fixups to arch/board specific

2025-10-22T18:05:52Z

The current spl_board_fixups API allows for modification of spl_image before the SPL jumps to it. This can be used to modify the DT for the next boot stage, however the current API only allows either the machine arch or the board to use it. This limits the utility of the API as there might be certain fixups that should be applied to all boards sharing the same machine architecture with others being board specific. For TI's K3 specifically, this prevents us from performing architecture level fixups since a lot of TI boards are already making use of the spl_board_fixups API. Therefore this patch splits the API into two to allow both board and the architecture specific fixups. The order is kept as arch then board to give board specific fixups the precedence. Reviewed-by: Dhruva Gole Signed-off-by: Anshul Dalal Tested-by: Wadim Egorov

Merge tag 'v2025.10-rc5' into next

2025-09-23T14:24:59Z

Prepare v2025.10-rc5

starfive: avoid NULL dereference in fdt_check_header()

2025-09-19T11:11:18Z

If the u-boot.itb read from SD-card is invalid, fdt_check_header() may be called with a NULL pointer. This was observed on an StarFive VisionFive Lite when trying to revover the board via UART. Add a missing check in the starfive board code. Signed-off-by: Heinrich Schuchardt Reviewed-by: E Shattow

board: starfive: visionfive2: deprecate mixed-case product ids VF7110a VF7110b

2025-09-16T16:16:54Z

Per recent discussion [1] product IDs VF7110A or VF7110B from EEPROM are sufficient to select for VisionFive 2 1.2a or VisionFive 2 1.3b boards. There are no VisionFive 2 products with mixed-case product IDs in EERPOM so factor out the unnecessary select case conditional. 1: https://lore.kernel.org/u-boot/ZQ2PR01MB1307D97D2C9566B8EE443812E6062@ZQ2PR01MB1307.CHNPR01.prod.partner.outlook.cn/ Signed-off-by: E Shattow Reported-by: Hal Feng

starfive: fix return code of `mac write_eeprom`

2025-08-14T07:33:00Z

When writing the EEPROM fails, the command usage help text is displayed after the error message. We should only display the error message instead. If writing the EEPROM fails, return CMD_RET_FAILURE (1) instead of CMD_RET_USAGE (-1). Fixes: aea1bd95b61e ("eeprom: starfive: Enable ID EEPROM configuration") Signed-off-by: Heinrich Schuchardt Acked-by: E Shattow

board: starfive: visionfive2: Order board detection logic to match config

2025-04-27T13:52:05Z

Fixup previous merge resolution of this series. Intent is to ease code readability and logic to match ordering in CONFIG_OF_LIST - Remove "starfive/" string math - Remove redundant local cache of calls to get_*_from_eeprom() - Match name before EEPROM product_id in board_fit_config_name_match() - Remove single-consumer FDTFILE_* defines - Do not set fdtfile for visionfive-2-* when unknown model revision Fixes: 5a0a93a76848 ("Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv") Signed-off-by: E Shattow

Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv

2025-04-25T19:13:17Z

CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/25940 - riscv: lib: Simplify FDT retrieving process - board: k1: pinctrl: Add pinctrl support for bananapi-f3 - binman: riscv: Fix binman_sym functionality - board: starfive: visionfive2: Reorder board detection logic - board: starfive: Add DeepComputing FML13V01 support

board: starfive: spl: support DeepComputing FML13V01

2025-04-25T15:32:08Z

On the DeepComputing Framework motherboard (FML13V01) choose the matching FIT configuration. Reviewed-by: Hal Feng Reviewed-by: Matthias Brugger Reviewed-by: E Shattow Signed-off-by: Heinrich Schuchardt

board: starfive: DeepComputing FML13V01 fdt selection

2025-04-25T15:32:08Z

We support all JH7110 boards with starfive_visionfive2_defconfig. The relevant device-tree is selected at runtime based on EEPROM data. Support setting $fdtfile to the file name of the DeepComputing Framework motherboard (FML13V01) device-tree. Reviewed-by: Hal Feng Reviewed-by: Matthias Brugger Reviewed-by: E Shattow Signed-off-by: Heinrich Schuchardt