u-boot.git/board/sunxi/Kconfig, branch master

sunxi: Support building a SPL as a TOC0 image

2022-04-04T22:24:17+00:00

Now that mkimage can generate TOC0 images, and the SPL can interpret
them, hook up the build infrastructure so the user can choose which
image type to build. Since the absolute load address is stored in the
TOC0 header, that information must be passed to mkimage.

Signed-off-by: Samuel Holland 
Reviewed-by: Andre Przywara 
Signed-off-by: Andre Przywara

ARM: sunxi: move board/sunxi/Kconfig to arch/arm/mach-sunxi/Kconfig

2017-05-02T07:20:30+00:00

For the consistent location of SoC-level Kconfig.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Maxime Ripard

sunxi: video: Add A64/H3/H5 HDMI driver

2017-04-28T07:21:25+00:00

This commit adds support for HDMI output.

Signed-off-by: Jernej Skrabec 
Reviewed-by: Simon Glass 
Acked-by: Maxime Ripard 
Signed-off-by: Maxime Ripard

sunxi: Enable DM_I2C for A64/H3/H5

2017-04-28T07:19:07+00:00

This commits enable DM I2C support for A64/H3/H5 SoCs.

It is not enabled globaly for all sunxi SoCs, because some boards use
PMICs which are connected through I2C. In order to keep same
functionality, PMIC drivers needs to be ported to DM too.

Signed-off-by: Jernej Skrabec 
Reviewed-by: Heiko Schocher 
Signed-off-by: Maxime Ripard

sunxi: add basic V3s support

2017-04-21T07:23:17+00:00

Basic U-Boot support is now present for V3s.

Some memory addresses are changed specially for V3s, as the original
address map cannot fit into a so small DRAM.

As the DRAM controller code needs a big refactor, the SPL support is
disabled in this version.

Signed-off-by: Icenowy Zheng 
Acked-by: Maxime Ripard 
Reviewed-by: Jagan Teki 
Signed-off-by: Maxime Ripard

sunxi: Add clock support for DE2/HDMI/TCON on newer SoCs

2017-04-20T11:37:31+00:00

This is needed for HDMI, which will be added later.

Signed-off-by: Jernej Skrabec 
Reviewed-by: Simon Glass 
Signed-off-by: Maxime Ripard

sunxi: Add PSCI support for R40

2017-04-20T11:30:01+00:00

The R40's CPU controls are a combination of sun6i and sun7i.

All controls are in the CPUCFG block, and it seems the R40 does not
have a PRCM block. The core reset, power gating and clamp controls
are grouped like sun6i.

Last, the R40 does not have a secure SRAM block.

This patch adds a PSCI implementation for CPU bring-up and hotplug
for the R40.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard

sunxi: Enable SPL for R40

2017-04-20T11:30:01+00:00

Now that we can do DRAM initialization for the R40, we can enable
SPL support for it.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard

sunxi: Provide defaults for R40 DRAM settings

2017-04-20T11:30:01+00:00

These values were taken from the Banana Pi M2 Ultra fex file
found in the released vendor BSP. This is the only publicly
available R40 device at the time of this writing.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard

sunxi: Enable AXP221s in I2C mode with the R40 SoC

2017-04-20T11:30:00+00:00

The R40 SoC uses the AXP221s in I2C mode to supply power.

Some regulator's common usages have changed, and also the recommended
voltage for existing usages have changed. Update the defaults to match.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard