u-boot.git/board/sunxi/Makefile, branch master

board: sunxi: Exclude DIP detection from XPL builds

2025-11-03T16:02:38+00:00

Disable DIP detection functionality in XPL (eXtended Program Loader)
images to reduce size and complexity in the early boot stage.

Signed-off-by: Kory Maincent (TI.com)

arm: sunxi: add support for DIP detection to CHIP board

2021-05-13T17:09:09+00:00

Add the extension_board_scan specific function to scan the information
of the EEPROM on one-wire and fill the extension struct.
Add the Kconfig symbol to enable the needs to detect DIPs.

Signed-off-by: Kory Maincent 
Reviewed-by: Maxime Ripard 
Acked-by: Andre Przywara

sunxi: update SATA driver to always use DM_SCSI

2019-04-17T09:04:45+00:00

It seems like the Allwinner SATA driver is already quite capable of
using the driver model, so we can force this on all boards and can
remove support for a non-DM_SCSI build.
This removes the warning about boards with SATA ports not being
DM_SCSI compliant.

It also takes the opportunity to move the driver out of the board/sunxi
directory to join its siblings in drivers/ata, and to make it a proper
Kconfig citizen.

The board defconfigs stay untouched.

Signed-off-by: Andre Przywara 
Reviewed-by: Simon Glass 
Reviewed-by: Jagan Teki 
[jagan: select DM_SCSI separately]
Signed-off-by: Jagan Teki

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

sunxi: Fix CONFIG_SUNXI_GMAC references

2017-09-01T15:18:27+00:00

SUNXI_GMAC was still used to configure the code where as the
same has been renamed and moved to Kconfig in below commit
"sunxi: Move SUNXI_GMAC to Kconfig"
(sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb)

Signed-off-by: Dave Prue 
Reviewed-by: Simon Glass 
Reviewed-by: Jagan Teki 
Reviewed-by: Mark Kettenis 
Tested-by: Mark Kettenis 
[Tweek commit message, config_whitelist.txt, build-whitelist.sh]
Signed-off-by: Jagan Teki

dm: sunxi: sata: Don't build sata support into SPL

2017-08-01T02:58:01+00:00

This is not used in SPL so we do not need to compile it. Make this change
before adding driver-model support to the driver, to avoid build errors.
With driver model we define a U_BOOT_DRIVER() which would otherwise be
present in SPL and not be garbage-collected when building.

Signed-off-by: Simon Glass 
Acked-by: Maxime Ripard

sunxi: Convert sun5i boards to use auto dram configuration

2015-02-02T12:55:14+00:00

Currently we've separate detailed dram settings for all sun5i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.

This has been tested on a A10s-Olinuxino, A13-Olinuxino, A13-OlinuxinoM,
mk802-a10s and r7-tv-dongle board.

Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell

sunxi: Convert sun7i boards to use auto dram configuration

2015-01-23T14:15:02+00:00

Currently we've separate detailed dram settings for all sun7i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.

This has been tested on a A20-Olinuxino-Lime, A20-Olinuxino_MICRO, Bananapi,
Bananapro, Cubieboard2, Cubietruck, Mele_M3 and a Linksprite_pcDuino3.

Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell

sunxi: Drop qt840a_defconfig

2015-01-23T14:15:02+00:00

The qt840a is one of the many tv-boxes using the "i12" A20 pcb, but it
populates only one of the 2 places for a 16 bit dram ic, thus reducing
the buswidth to 16 bits, and the amount of ram to 512M, which is why we
had a separate config for it.

This commit switches the generic i12-tvbox_defconfig over to DRAM
autoconfiguration, so that it will work with the qt840a too, and drops the
qt840a specific config, like we've done with other memory-amount specific
configs before.

Tested on a generic i12-tvbox with 32 bit bus-width / 1G RAM, and on a
qt840a with 16 bit bus-width / 512M RAM.

Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell

sunxi: Add mk802_a10s board / defconfig

2015-01-22T11:34:56+00:00

The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has
an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand,
a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG)
and a sdio realtek wifi chip. Unlike the original mk802 it does have a pmic,
the axp152.

For more details see: http://linux-sunxi.org/Semitime_g2

Signed-off-by: Hans de Goede 
Acked-by: Ian Campbell