u-boot.git/board/sunxi, branch v2015.07

sunxi: Add Sinlinx SinA33 defconfig

2015-07-05T09:32:11Z

Sinlinx SinA33 is a core/daughter board SDK kit from Sinlinx. It has the A33 SoC, USB host, USB OTG, audio input/output, LCD, camera, SDIO and GPIO headers. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede

Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"

2015-06-28T15:46:31Z

This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a. This patch did not have a full and proper copyright/S-o-b chain. Signed-off-by: Ian Campbell Conflicts: include/configs/sun6i.h include/configs/sun8i.h

Move default y configs out of arch/board Kconfig

2015-06-26T02:17:55Z

Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini

sunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default

2015-06-05T19:09:14Z

Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default rather then needing to have this in every sunxi defconfig file. This also fixes the Merrii_A80_Optimus defconfig no longer building. Cc: Maxin B. John Reported-by: Maxin B. John Signed-off-by: Hans de Goede Acked-by: Ian Campbell

sunxi: Rename Astar_MID756 to Et_q8_v1_6 to match kernel dts name

2015-06-04T12:12:07Z

Rename the Astar_MID756 to Et_q8_v1_6 to match the kernel dts name. Signed-off-by: Hans de Goede Acked-by: Ian Campbell

sunxi: Add new Mele_A1000G_quad defconfig

2015-06-04T12:11:23Z

The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same defconfig (and dts on the kernel side) for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge. This commit adds a new defconfig for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards. Signed-off-by: Hans de Goede Acked-by: Ian Campbell

Merge branch 'master' of git://git.denx.de/u-boot-net

2015-06-02T12:53:41Z

Fixup include/configs/unipher.h to not set CONFIG_LIB_RAND Signed-off-by: Tom Rini

net: Move the CMD_NET config to defconfigs

2015-06-01T14:40:15Z

This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a8 (commands: add more command entries in Kconfig). Signed-off-by: Joe Hershberger

ARM: sunxi: Enable PSCI for sun8i

2015-05-29T11:46:36Z

sun8i uses the same PSCI backend as sun6i, without power clamps. Since there is no secure SRAM, the backend is placed at the end of DRAM. Signed-off-by: Chen-Yu Tsai Acked-by: Hans de Goede Signed-off-by: Hans de Goede

ARM: sunxi: Enable PSCI for sun6i

2015-05-29T11:46:36Z

Now that we have a PSCI backend for sun6i, enable it. Signed-off-by: Chen-Yu Tsai Acked-by: Hans de Goede Signed-off-by: Hans de Goede