u-boot.git/board/sunxi, branch v2018.09

board: sunxi: Remove unused local variables

2018-08-20T12:40:43Z

variables buf from board_mmc_init, and ret from misc_init_r were unused on the functions, so remove it. Acked-by: Maxime Ripard Signed-off-by: Jagan Teki

board: sun50i: h6: Add OrangePi One Plus initial support

2018-07-31T15:20:01Z

OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki Acked-by: Maxime Ripard

sunxi: add support for Pine H64 board

2018-07-31T06:08:13Z

Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Reviewed-by: Jagan Teki Tested-by: Jagan Teki

sunxi: add MMC support for H6

2018-07-31T06:08:13Z

The Allwinner H6 SoC has 3 MMC controllers like the ones in A64, with the MMC2 come with the capability to do crypto by EMCE. Add MMC support for H6. EMCE support is not added yet. Signed-off-by: Icenowy Zheng Reviewed-by: Jagan Teki Tested-by: Jagan Teki

sunxi: change ATF position for H6

2018-07-31T06:08:13Z

H6 has different SRAM A2 address, so the ATF load address is also different. Add judgment code to sunxi 64-bit FIT generation script. It will judge the SoC by the device tree's name. Signed-off-by: Icenowy Zheng Reviewed-by: Andre Przywara Acked-by: Maxime Ripard Reviewed-by: Jagan Teki Tested-by: Jagan Teki

sun50i: h5: Add initial Orange Pi Zero Plus support

2018-06-16T09:22:42Z

Orange Pi Zero Plus is an open-source single-board computer using the Allwinner H5 SOC. H5 Orangepi Zero Plus has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot - 16MBit SPI Nor flash - Debug TTL UART - 1GBit/s Ethernet (RTL8211E) - Wifi (RTL8189FTV) - USB 2.0 Host - USB 2.0 OTG + power supply The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens Acked-by: Maxime Ripard Reviewed-by: Jagan Teki

sun8i: h2: Add initial Orange Pi R1 support

2018-06-16T09:22:42Z

Orange Pi R1 is an open-source single-board computer using the Allwinner H2+ SOC. H2+ Orange Pi R1 has - Quad-core Cortex-A7 - 256MB DDR3 - micrSD slot - 128MBit SPI Nor flash - Debug TTL UART - 100MBit/s Ethernet (H2+) - 100MBit/s Ethernet (RTL8152B) - Wifi (RTL8189ETV) - USB 2.0 OTG + power supply This board is very similar to the Orange Pi Zero. The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens Acked-by: Maxime Ripard Reviewed-by: Jagan Teki

board: sun50i: Add Amarula A64-Relic initial support

2018-06-04T12:39:25Z

Amarula A64-Relic is A64 based IoT device, which support - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 1GB DDR3 RAM - 8GB eMMC - AP6330 Wifi/BLE - MIPI-DSI - CSI: OV5640 sensor - USB OTG - 12V DC power supply Signed-off-by: Jagan Teki Acked-by: Maxime Ripard

sunxi: Drop legacy usb_phy.c

2018-05-28T11:10:43Z

Allwinner PHY USB code is now part of generic-phy framework, so drop existing legacy handling like arch/arm/mach-sunxi.c and related code areas. Signed-off-by: Jagan Teki Acked-by: Jun Nie

board: sunxi: Use generic-phy for board_usb_cable_connected

2018-05-28T11:10:43Z

Allwinner PHY USB code is now part of generic-phy framework, so use it in board_usb_cable_connected. Signed-off-by: Jagan Teki Acked-by: Jun Nie